Comparison of Mechanical properties of AA6061 reinforced with (SiC/B4C) micro/nano ceramic particle reinforcements

被引：23
|
作者：
Das, Shubhajit [1 ]
Chandrasekaran, M. [2 ]
Samanta, S. [2 ]
机构：
[1] NIT Arunachal Pradesh, Dept Mech Engn, Papum Pare 791112, Arunachal Prade, India
[2] NERIST, Dept Mech Engn, Itanagar 791109, Arunachal Prade, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 09期
关键词：
Metal Matrix composites; hybrid metal matrix composites; AA6061; mechanical properties; ALUMINUM-ALLOY COMPOSITES; METAL-MATRIX COMPOSITES; DRY SLIDING WEAR; TENSILE PROPERTIES; SILICON-CARBIDE; B4C COMPOSITE; MICROSTRUCTURE;
D O I：
10.1016/j.matpr.2018.06.146
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Aluminium alloy (AA) based composites are finding wide acceptance in industries due to high performance efficiencies and superior properties. AA6061 based composites have found wide applicability in aerospace, automobiles and recreational industries. Hybrid metal matrix composites (HMMCs) have proved to have improved performance and excellent adaptability compared to single reinforced composites. In the present study, two compositions of HMMCs were fabricated using conventional stir casting route. AA6061 is used as the matrix material and nano SiC/B4C as reinforcements. Physical properties like density and porosity and mechanical properties like micro hardness, ultimate tensile strength and impact strength of these HMMCs were investigated and compared with single reinforced micro/nano composites. The HMMC was found to have improved mechanical properties. Significant improvement in ductility and porosity was seen when composites were reinforced with nano size reinforcements. (C) 2018 Elsevier Ltd. All rights reserved.
引用
收藏
页码：18110 / 18119
页数：10
相关论文
共 50 条
  • [1] Mechanical and metallurgical characterization of B4C and SiC reinforced stir casted AA6061 hybrid MMC
    Balasubramani, Veerappan
    Pandiarajan, R.
    Stalin, Balasubramanian
    Kavimani, Vijayananth
    [J]. PHYSICA SCRIPTA, 2023, 98 (10)
  • [2] Effect of 6 Wt.% Particle (B4C + SiC) Reinforcement on Mechanical Properties of AA6061 Aluminum Hybrid MMC
    Bommana, Divakar
    Dora, T. Rajesh Kumar
    Senapati, N. Pallavi
    Kumar, A. Sunny
    [J]. SILICON, 2022, 14 (08) : 4197 - 4206
  • [3] Effect of 6 Wt.% Particle (B4C + SiC) Reinforcement on Mechanical Properties of AA6061 Aluminum Hybrid MMC
    Divakar Bommana
    T. Rajesh Kumar Dora
    N. Pallavi Senapati
    A. Sunny Kumar
    [J]. Silicon, 2022, 14 : 4197 - 4206
  • [4] Microstructure and mechanical properties of micro/nano B4C particle reinforced 6061Al matrix composites
    Liu R.
    Wang W.
    Zhao W.
    [J]. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2021, 38 (10): : 3394 - 3401
  • [5] Effect of particle size on the mechanical properties of SiC particulate reinforced aluminium alloy AA6061
    Sternowsky, SB
    ODonnell, G
    Looney, L
    [J]. CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, 1997, 127-3 : 455 - 462
  • [6] Fabrication and tribological study of AA6061 hybrid metal matrix composites reinforced with SiC/B4C nanoparticles
    Das, Shubhajit
    Chandrasekaran, M.
    Samanta, Sutanu
    Kayaroganam, Palanikumar
    Paulo Davim, J.
    [J]. INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2019, 71 (01) : 83 - 93
  • [7] Mechanical and Microstructural Characterization of Friction Stir Welded SiC and B4C Reinforced Aluminium Alloy AA6061 Metal Matrix Composites
    Ali, Kaveripakkam Suban Ashraff
    Mohanavel, Vinayagam
    Vendan, Subbiah Arungalai
    Ravichandran, Manickam
    Yadav, Anshul
    Gucwa, Marek
    Winczek, Jerzy
    [J]. MATERIALS, 2021, 14 (11)
  • [8] Assessment of Mechanical and Tribological Behavior of AA6061 Reinforced with B4C and Gr Hybrid Metal Matrix Composites
    Yunus, Mohammed
    Alfattani, Rami
    [J]. COATINGS, 2023, 13 (09)
  • [9] Investigation of Mechanical and Tribological Properties of AA6061/MWCNT/B4C Hybrid Metal Matrix Composite
    Satishkumar, P.
    Natarajan, N.
    Saminathan, Rajasekaran
    Hillary, J. Justin Maria
    Birhanu, Biru
    Alguno, Arnold C.
    Capangpangan, Rey Y.
    Raj, Vishnu
    Livingston, Stephen
    [J]. ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [10] Tribological and mechanical properties of AA6061 reinforced with SiC and graphite for automobile applications
    Padmavathy, S.
    Kamalakannan, R.
    Manikandan, A.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 24 - 29
12345