Effects of Ti/TiN multilayer on corrosion resistance of nickel-titanium orthodontic brackets in artificial saliva

被引：91
|
作者：
Liu, Chenglong
Chu, Paul K.
Lin, Guoqiang
Yang, Dazhi
机构：
[1] City Univ Hong Kong, Dept Phys & Mat Sci, Kowloon, Hong Kong, Peoples R China
[2] Dalian Univ Technol, State Key Lab Mat Modificat Laser Ion & Elect Bea, Dalian 116024, Peoples R China
来源：
CORROSION SCIENCE | 2007年 / 49卷 / 10期
基金：
中国国家自然科学基金;
关键词：
multilayered Ti/TiN coating; metal ion release; artificial saliva; corrosion resistance;
D O I：
10.1016/j.corsci.2007.03.041
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of multilayered Ti/TiN or single-layered TiN films deposited by pulse-biased arc ion plating (PBAIP) on the corrosion behavior of NiTi orthodontic brackets in artificial saliva are investigated. The multilayered Ti/TiN coating is found to exhibit a greater free corrosion potential, much lower passive current density, and no breakdown up to 1.5 V. Moreover, electrochemical impedance spectroscopy (EIS) results indicate that the multilayered Ti/TiN coating has a larger impedance and lower porosity which is believed to be responsible for the exceedingly low metal ion release rate during 720 h exposure in the test solution. Visual inspection of the surfaces reveals different corrosion processes for the TiN and multilayered Ti/TiN coatings. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3783 / 3796
页数：14
相关论文
共 50 条
  • [1] Surface characterizations and corrosion resistance of nickel-titanium orthodontic archwires in artificial saliva of various degrees of acidity
    Huang, HH
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 2005, 74A (04) : 629 - 639
  • [2] Effect of titanium nitride/titanium coatings on the stress corrosion of nickel-titanium orthodontic archwires in artificial saliva
    Liu, Jia-Kuang
    Liu, I-Hua
    Liu, Cheng
    Chang, Chen-Jung
    Kung, Kuan-Chen
    Liu, Yen-Ting
    Lee, Tzer-Min
    Jou, Jin-Long
    APPLIED SURFACE SCIENCE, 2014, 317 : 974 - 981
  • [3] Determination of corrosion rate of orthodontic wires based on nickel-titanium alloy in artificial saliva
    Katic, V.
    Curkovic, L.
    Bosnjak, M. Ujevic
    Spalj, S.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2014, 45 (02) : 99 - 105
  • [4] Corrosion Resistance of Different Nickel-Titanium Archwires in Acidic Fluoride-containing Artificial Saliva
    Lee, Tzu-Hsin
    Huang, Ta-Ko
    Lin, Shu-Yuan
    Chen, Li-Kai
    Chou, Ming-Yung
    Huang, Her-Hsiung
    ANGLE ORTHODONTIST, 2010, 80 (03) : 547 - 553
  • [5] Corrosion of stainless steel, nickel-titanium, coated nickel-titanium, and titanium orthodontic wires
    Kim, H
    Johnson, JW
    ANGLE ORTHODONTIST, 1999, 69 (01) : 39 - 44
  • [6] Nickel concentration in the saliva of patients with nickel-titanium orthodontic appliances
    Petoumenou, Evangelia
    Arndt, Martin
    Keilig, Ludger
    Reimann, Susanne
    Hoederath, Hildegard
    Eliades, Theodore
    Jaeger, Andreas
    Bourauel, Christoph
    AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS, 2009, 135 (01) : 59 - 65
  • [7] Surface analysis and corrosion resistance of different stainless steel orthodontic brackets in artificial saliva
    Lin, MC
    Lin, SC
    Lee, TH
    Huang, HH
    ANGLE ORTHODONTIST, 2006, 76 (02) : 322 - 329
  • [8] Electrochemical research on the corrosion of orthodontic nickel-titanium wires
    Vandenkerckhove, R
    Temmerman, E
    Verbeeck, R
    ELECTROCHEMICAL METHODS IN CORROSION RESEARCH VI, PTS 1 AND 2, 1998, 289-2 : 1289 - 1298
  • [9] Corrosion Behavior of Coated and Uncoated Nickel-Titanium Orthodontic Wires in Artificial Saliva with Short-term Prophylactic Fluoride Treatment
    Katic, Visnja
    Buljan, Zorana Ivankovic
    Spalj, Stjepan
    Curkovic, Helena Otmacic
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2018, 13 (05): : 4160 - 4170
  • [10] Electrochemical release testing of nickel-titanium orthodontic wires in artificial saliva using thin layer activation
    Cioffi, M
    Gilliland, D
    Ceccone, G
    Chiesa, R
    Cigada, A
    ACTA BIOMATERIALIA, 2005, 1 (06) : 717 - 724
12345