An impact-abrasion resistant surfacing electrode and its wear-resistant mechanism

被引：0
|
作者：
Liu, Zheng-jun [1 ]
Zeng, Xie-bo [2 ]
机构：
[1] Shenyang Univ Technol, Sch Mat Sci & Engn, 58 S Xinhua St,Tiexi Dist, Shenyang 10023, Liaoning Prov, Peoples R China
[2] Tien Tai Electrode Kunshan Co Ltd, Kunshan, Jiangsu, Peoples R China
来源：
SURFACE ENGINEERING (ICSE 2007) | 2008年 / 373-374卷
关键词：
surfacing electrode; work-hardening; impact-abrasion; wear-resistance;
D O I：
10.4028/www.scientific.net/KEM.373-374.547
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Aiming at improving the impact wear-resistant performance of metals, a new sort of surfacing electrode named TKCE50 was developed in this paper. This electrode is a Fe-Mn-Cr-Mo-V alloy system and belongs to iron-base wear-resistant materials. Tests like hardness, wear loss and impact-abrasion test were performed on the samples surfaced with the electrode. The results indicated that TKCE50 had not only good welding technological properties, but also super work-hardening effect and perfect impact wear-resistance. In addition, the work-hardening and wear-resistant mechanisms for this electrode were discussed based on corresponding experimental investigation and theoretical analysis.
引用
收藏
页码：547 / +
页数：2
相关论文
共 50 条
  • [1] Impact-abrasion wear of wear-resistant steels at perpendicular and tilted angles
    Ratia, Vilma
    Valtonen, Kati
    Kuokkala, Veli-Tapani
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2013, 227 (08) : 868 - 877
  • [2] High-stress abrasion and impact-abrasion testing of wear resistant steels
    [J]. Ratia, V. (vilma.ratia@tut.fi), 1600, Japanese Society of Tribologists (08):
  • [3] Physical Modeling of the Mechanism of Modification with Wear-Resistant Surfacing
    Romanenko D.N.
    Artemenko Y.A.
    Emelyushin A.N.
    Dema R.R.
    Nefed’ev S.P.
    Zhuravlev G.M.
    [J]. Chemical and Petroleum Engineering, 2017, 52 (11-12) : 769 - 773
  • [4] Experimental study of modification mechanism at a wear-resistant surfacing
    Dema, R. R.
    Amirov, R. N.
    Kalugina, O. B.
    [J]. XI INTERNATIONAL SCIENTIFIC AND TECHNICAL CONFERENCE - APPLIED MECHANICS AND DYNAMICS SYSTEMS, 2018, 944
  • [5] WEAR-RESISTANT SURFACING MATERIALS IN PAPERMAKING
    LUTES, WL
    REID, HF
    [J]. TAPPI, 1975, 58 (07): : 87 - 90
  • [6] Effect of retained austenite on impact-abrasion wear performance of high-strength wear-resistant steel prepared by dynamic partitioning process
    Niu, Gang
    Jin, Donghao
    Wang, Yong
    Gu, Chen
    Ju, Biao
    Ning, Bo
    Gong, Na
    Misra, R. D. K.
    Shang, Chengjia
    Wu, Huibin
    [J]. WEAR, 2024, 538
  • [7] WEAR-RESISTANT SURFACING ON THE INNER SURFACES OF PIPELINES AND VESSELS
    Igolkin, A. I.
    Zelenin, Yu. V.
    [J]. CHEMICAL AND PETROLEUM ENGINEERING, 2009, 45 (3-4) : 251 - 254
  • [8] Improving drill pipe durability by wear-resistant surfacing
    Fedorova, Lilia
    Fedorov, Sergey
    Ivanova, Yuliya
    Voronina, Marianna
    Fomina, Ludmila
    Morozov, Alexander
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 30 : 398 - 403
  • [9] MECHANIZED WEAR-RESISTANT SURFACING OF PAIRS OF ROLLING FRICTION COMPONENTS
    SOLDATKI.AP
    GAPCHENK.MN
    AGULOV, II
    [J]. AUTOMATIC WELDING USSR, 1973, 26 (04): : 55 - 59
  • [10] A PROCEDURE FOR DETERMINING THE RESISTANCE OF WEAR-RESISTANT SURFACING ALLOYS TO LOADS
    VOROTNIKOV, VY
    IVANOV, SV
    ARTEMENKO, YA
    [J]. AUTOMATIC WELDING USSR, 1983, 36 (09): : 53 - 54
12345