Nanocrystallization and Dissolution of Immiscible Powder Alloys Using High Pressure Torsion

被引：1

作者：

Kahofer, S. ^{[1
,2
]}

Zehetbauer, M. J. ^{[1
]}

Danninger, H. ^{[2
]}

Schafler, E. ^{[1
]}

Kerber, M. ^{[1
]}

Horky, J. ^{[1
]}

机构：

[1] Univ Vienna, Fac Phys, Boltzmanngasse 5, A-1090 Vienna, Austria

[2] Vienna Univ Technol, Inst Chem Technol & Analyt, A-1060 Vienna, Austria

来源：

NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2 | 2011年 / 667-669卷

关键词：

High Pressure Torsion; immiscible systems; consolidation; nanocrystallization; compacts; DEFORMATION;

D O I：

10.4028/www.scientific.net/MSF.667-669.151

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Precompacts out of immiscible systems CuCr (75/25 wt%) and WCu (80/20 wt%), respectively, were made by pressing mixed powders and sintering. By applying different strains and hydrostatic pressures of HPT at room temperature, disc-shaped samples with a diameter of 8 mm were produced. They were investigated by Light Microscopy, Scanning-Electron Microscopy using Back-Scattered Electrons, and X-ray Line Profile Analysis. In addition, Vickers microhardness data were collected. Both systems showed the highest microhardness at a shear strain of about gamma = 170. The density (for the case of Cu25Cr) of the consolidated material could be increased to the theoretical value. Microhardness and grain sizes were studied individually for each of the phases, too.

引用

页码：151 / +

页数：2

共 50 条

[1] Microstructural evolution in immiscible alloys processed by High-Pressure Torsion
Bachmaier, A.
Neubauer, E.
Kitzmantel, M.
Pippan, R.
Motz, C.
6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6), 2014, 63
[2] Nanocrystallization of NiTi shape memory alloys made amorphous by high-pressure torsion
Peterlechner, M.
Waitz, T.
Karnthaler, H. P.
SCRIPTA MATERIALIA, 2008, 59 (05) : 566 - 569
[3] Fabrication and characterization of nanostructured immiscible Cu-Ta alloys processed by high-pressure torsion
Mousavi, Tayebeh
Dai, Jiaoyan
Bazarnik, Piotr
Pereira, Pedro Henrique R.
Huang, Yi
Lewandowska, Malgorzata
Langdon, Terence G.
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 832
[4] On the phase evolution and dissolution process in Cu-Cr alloys deformed by high pressure torsion
Guo, Jinming
Rosalie, Julian
Pippan, Reinhard
Zhang, Zaoli
SCRIPTA MATERIALIA, 2017, 133 : 41 - 44
[5] Competition between precipitation and dissolution in Cu-Ag alloys under high pressure torsion
Straumal, B. B.
Pontikis, V.
Kilmametov, A. R.
Mazilkin, A. A.
Dobatkin, S. V.
Baretzky, B.
ACTA MATERIALIA, 2017, 122 : 60 - 71
[6] Using high pressure torsion to process magnesium alloys for biological applications
Medeiros, Mariana P.
Carvalho, Amanda P.
Isaac, Augusta
Afonso, Conrado R. M.
Janecek, Milos
Minarik, Peter
Celis, Mayerling Martinez
Figueiredo, Roberto B.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 3075 - 3084
[7] High pressure torsion of Cu-Ag and Cu-Sn alloys: Limits for solubility and dissolution
Straumal, B. B.
Kilmametov, A. R.
Baretzky, B.
Kogtenkova, O. A.
Straumal, P. B.
Litynska-Dobrzynska, L.
Chulist, R.
Korneva, A.
Zieba, P.
ACTA MATERIALIA, 2020, 195 : 184 - 198
[8] Forced chemical mixing of immiscible Ag-Cu heterointerfaces using high-pressure torsion
Pouryazdan, M.
Schwen, D.
Wang, D.
Scherer, T.
Hahn, H.
Averback, R. S.
Bellon, P.
PHYSICAL REVIEW B, 2012, 86 (14):
[9] Gradient Structure in High Pressure Torsion Compacted Iron Powder
Zhao, Yajun
Massion, Roxane
Grosdidier, Thierry
Toth, Laszlo S.
ADVANCED ENGINEERING MATERIALS, 2015, 17 (12) : 1748 - 1753
[10] High-Pressure Torsion for Synthesis of High-Entropy Alloys
Edalati, Kaveh
Li, Hai-Wen
Kilmametov, Askar
Floriano, Ricardo
Borchers, Christine
METALS, 2021, 11 (08)

← 1 2 3 4 5 →