Effect of Electrocorundum Powder Grain Size Composition with a Porcelain Binder on Porous Ceramic Gas Permeability and Strength

被引：5
|
作者：
Belyakov, A. V. [1 ]
Oo, Zaw Ye Maw [1 ]
Popova, N. A. [1 ]
Min, Ye Aung [1 ]
机构：
[1] FGBOU VO DI Mendeleev Russian Chem Technol Univ, Moscow, Russia
来源：
REFRACTORIES AND INDUSTRIAL CERAMICS | 2017年 / 58卷 / 04期
关键词：
porous permeable ceramic; electromelted corundum (EMC); ceramic filters; gas permeability factor;
D O I：
10.1007/s11148-017-0116-x
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Porous permeable materials of electromelted corundum with fineness of 2 - 3 and 0.5 mm are prepared with a porcelain mix binder. Ratios in filler fractions 2 - 3 and 0.5 mm: 0/95, 35/60, 40/55, 45/50, 50/45, and 95/0. Specimens are compacted under a pressure of 24, 50, and 100 MPa and fired at 1350 and 1450A degrees C. Sintered specimen ultimate strength in bending is from 1.9 to 15.3 MPa, open porosity 17 and 26%, gas permeability coefficient of single-fraction compositions from 1.19 to 3.27 mu m(2). The porous permeable ceramic material obtained is promising for use in the form of filters and ceramic membrane substrates.
引用
收藏
页码：390 / 394
页数：5
相关论文
共 50 条
  • [11] Varying the Granulometric Composition of an Electrofused-Corundum-Based Ceramic with a Porcelain Binder to Control its Open Porosity and Strength
    A. V. Belyakov
    Zaw Ye Maw Oo
    N. A. Popova
    Ye Aung Min
    Kyaw Lwin Oo
    Refractories and Industrial Ceramics, 2016, 57 : 77 - 80
  • [12] STUDY OF THE EFFECT OF ALUMINOSILICATE BINDER CHEMICAL COMPOSITION ON PHYSICOTECHNICAL PROPERTIES OF POROUS PERMEABLE CERAMIC
    Krasnyi, B. L.
    Tarasovskii, V. P.
    Krasnyi, A. B.
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2012, 52 (06) : 405 - 408
  • [13] Study of the effect of aluminosilicate binder chemical composition on physicotechnical properties of porous permeable ceramic
    B. L. Krasnyi
    V. P. Tarasovskii
    A. B. Krasnyi
    Refractories and Industrial Ceramics, 2012, 52 : 405 - 408
  • [14] Effect of electromelted corundum crystal size and shape on the microstructure and permeability of porous ceramic
    B. L. Krasnyi
    V. P. Tarasovskii
    A. B. Krasnyi
    A. M. Uss
    Refractories and Industrial Ceramics, 2009, 50 : 451 - 455
  • [15] EFFECT OF ELECTROMELTED CORUNDUM CRYSTAL SIZE AND SHAPE ON THE MICROSTRUCTURE AND PERMEABILITY OF POROUS CERAMIC
    Krasnyi, B. L.
    Tarasovskii, V. P.
    Krasnyi, A. B.
    Uss, A. M.
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2009, 50 (06) : 451 - 455
  • [16] Effect of firing temperature, quartz grain size and content on bending strength and microstructure of sanitaryware porcelain
    Stathis, G
    Ekonomakou, A
    Stournaras, CJ
    Ftikos, C
    EURO CERAMICS VII, PT 1-3, 2002, 206-2 : 1731 - 1734
  • [17] Effect of lamination conditions on gas permeability and adhesion strength of green ceramic tapes
    Yun, J. W.
    Scheuer, P. J.
    Krueger, D. S.
    Lombardo, S. J.
    ADVANCES IN APPLIED CERAMICS, 2008, 107 (04) : 190 - 198
  • [18] Effect of Powder Grain Size on Microstructure and Magnetic Properties of Hexagonal Barium Ferrite Ceramic
    Li-Huan Shao
    Si-Yun Shen
    Hui Zheng
    Peng Zheng
    Qiong Wu
    Liang Zheng
    Journal of Electronic Materials, 2018, 47 : 4085 - 4089
  • [19] Effect of Powder Grain Size on Microstructure and Magnetic Properties of Hexagonal Barium Ferrite Ceramic
    Shao, Li-Huan
    Shen, Si-Yun
    Zheng, Hui
    Zheng, Peng
    Wu, Qiong
    Zheng, Liang
    JOURNAL OF ELECTRONIC MATERIALS, 2018, 47 (07) : 4085 - 4089
  • [20] Effect of powder particle size on the strength of ceramic cores made by injection moulding process
    Keyanpour-Rad, M
    Aghajani, RH
    Mehrabi, HA
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY, 2002, 26 (B1): : 49 - 54
12345