Study on the seismic behaviour of steel shear plates

To design a steel shear wall, dynamics of stress concentration on the columns and beam under lateral loads is essential. Therefore, it has been suggested that the thickness of plates should be reduced as much as possible. In cases where a plate with low thickness is not available, this is compensated by using either low-yield-stress plate or by preparing some holes in the structure. Two objectives are pursued in this study, namely, the formulation of a new time integration method for evaluating structural seismic behaviour, and to discover the influences of the yield strength of the steel plate and openings on the wall. The results obtained indicate that the proposed scheme can accurately assess the seismic performance of structures. In addition, in the shear wall with low yield stress, where the steel plate has 5% and 10% openings, there are no significant differences between the outputs of widespread and concentrated openings. The behaviours of these two kinds of shear walls are approximately the same.