Effect of fluidity on the manufacturing of open cell magnesium alloy foams

被引：19

作者：

Yue, Xue-Zheng ^{[1
]}

Kitazono, Koichi ^{[1
]}

Yue, Xue-Jie ^{[2
]}

Hur, Bo-Young ^{[3
]}

机构：

[1] Tokyo Metropolitan Univ, Grad Sch Syst Design, Tokyo 1910065, Japan

[2] Xinxiang Univ, Dept Architectural Engn, Xinxiang 453000, Peoples R China

[3] Gyeongsang Natl Univ, 501 Jinju Daero, Jinju, Gyeongnam, South Korea

来源：

JOURNAL OF MAGNESIUM AND ALLOYS | 2016年 / 4卷 / 01期

关键词：

Magnesium alloy; Fluidity; Open cell; Vacuum; ALUMINUM FOAMS; BEHAVIOR;

D O I：

10.1016/j.jma.2015.11.007

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effect of fluidity on open cell AZ31 metal foam samples fabricated using a solid state space holder method was investigated. Granule was fabricated by plaster powder and perlite powder. Granules were sieved which compacted layer by layer in casting mold. Preforms which made by granules were then heated to 200 degrees C, 300 degrees C, 400 degrees C, 500 degrees C under a rough (mechanical) vacuum before pressure infiltration with AZ31 Mg alloy. Samples were infiltrated using vacuum pressure values range of 8-14 KPa. The conditions of pressure and temperature were performed in order to get different fluidity on manufacturer of open cell AZ31 metal foam specimen quantity. It is found that the fluidity plays significant role to determine the open cell AZ31 alloy foam. The fluidity is affected by preheat temperature and infiltration vacuum pressure. The macrostructure, the distribution of the pores, microstructure, infiltration length, and porosity were investigated. (C) 2016 Production and hosting by Elsevier B.V. on behalf of Chongqing University.

引用

页码：1 / 7

页数：7