Staple Holding Strength of Furniture Frame Joints Constructed of Plywood and Solid Wood

The withdrawal and lateral holding properties of three types of plywood with one stapled as well as one-row multi-stapled joints were studied and compared. The results show that variations in plywood density have a significant effect on withdrawal strength and a relatively small effect on lateral holding strength. At four staples, the withdrawal strength of the eucalyptus plywood with a density of 0.59 g/cm(3) is 1821 N, which is 21% higher than that of poplar plywood with a density of 0.51 g/cm(3) at 1498 N and 32% higher than that of eucalyptus/poplar composite plywood with a density of 0.53 g/cm(3) at 1275 N. In terms of lateral holding strength, eucalyptus plywood has a lateral holding strength of 1603 N 12% lower than the 1807 N of eucalyptus/poplar composite plywood and 10% lower than the 1761 N of poplar plywood. As the number of staples increased from 1 to 4 in increments of 1, the withdrawal strength of eucalyptus plywood continued to increase, while the nodal strengths of the poplar plywood as well as eucalyptus/poplar composite plywood did not differ significantly between 3 and 4 staples, and there is a significant increase in the lateral holding strength for all three plywood nodes. Equations for predicting the withdrawal and lateral holding strengths of one-row multi-stapled joints were derived separately.