Joining of Al2O3 to Cu with Cu-Sn-Ti active brazing filler alloy

被引：4
|
作者：
Yuan, Linlin [1 ,2 ]
Wang, Wei [1 ]
Huang, Xiaomeng [2 ]
Qi, Yuefeng [2 ]
Li, Xiaoying [1 ]
机构：
[1] Nonferrous Met & Rare Earth Res Inst Co Ltd, Beijing 100012, Peoples R China
[2] Beijing Engn Res Ctr New Brazing Mat Elect Inform, Beijing 100012, Peoples R China
来源：
WELDING IN THE WORLD | 2022年 / 66卷 / 07期
关键词：
Aluminum oxide; Active brazing; Microstructure; Mechanical properties; MECHANICAL-PROPERTIES; MICROSTRUCTURE; COPPER; STRENGTH; LAYER;
D O I：
10.1007/s40194-022-01305-5
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, Cu-Sn-Ti active brazing alloys were prepared by vacuum induction melting. The microstructure and melting properties of as-cast Cu-Sn-Ti alloys were analyzed using scanning electron microscopy and differential scanning calorimetry. The optimal 87Cu-8Sn-5Ti paste was used for Al2O3/Cu brazing, and the sound joints were obtained in vacuum at 930 degrees C for 10 min. The joint microstructures were studied by means of SEM and EDS. The results show that there exist three zones in the brazing seam and the bonding area of the joint mainly consists of TiO, Cu3Ti3O and Cu-Ti compounds. The maximum value of the tensile strength of brazed joints reached 154 MPa.
引用
收藏
页码：1471 / 1479
页数：9
相关论文
共 50 条
  • [1] Joining of Al2O3 to Cu with Cu-Sn-Ti active brazing filler alloy
    Linlin Yuan
    Wei Wang
    Xiaomeng Huang
    Yuefeng Qi
    Xiaoying Li
    Welding in the World, 2022, 66 : 1471 - 1479
  • [2] Effect of Sn on the microstructure and properties of Cu-Sn-Ti brazing filler metal
    Hanjie Xuebao/Transactions of the China Welding Institution, 2024, 45 (02): : 89 - 97
  • [3] Characteristics of Al2O3/diamond/c-BN/SiC grain steel brazing joints using Cu-Sn-Ti active filler powder alloys
    Liu, Sixing
    Xiao, Bing
    Xiao, Haozhong
    Meng, Longhui
    Zhang, Ziyu
    Wu, Hengheng
    SURFACE & COATINGS TECHNOLOGY, 2016, 286 : 376 - 382
  • [4] Cu + TiB2 composite filler for brazing Al2O3 and Ti-6Al-4V alloy
    Yang, Minxuan
    Lin, Tiesong
    He, Peng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 512 (01) : 282 - 289
  • [5] Metallurgical reactions controlling the brazing of Al2O3 with Ag–Cu–Ti filler alloys
    M. Paulasto
    J. Kivilahti
    Journal of Materials Research, 1998, 13 : 343 - 352
  • [6] Joining of sapphire and hot pressed Al2O3 using Ag70.5Cu27.5Ti2 brazing filler metal
    Ning, HL
    Geng, ZT
    Ma, JS
    Huang, FX
    Qian, ZY
    Han, ZD
    CERAMICS INTERNATIONAL, 2003, 29 (06) : 689 - 694
  • [7] Metallurgical reactions controlling the brazing of Al2O3 with Ag-Cu-Ti filler alloys
    Paulasto, M
    Kivilahti, J
    JOURNAL OF MATERIALS RESEARCH, 1998, 13 (02) : 343 - 352
  • [8] Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy
    Wen-Chung Li
    Shun-Tian Lin
    Cheng Liang
    Metallurgical and Materials Transactions A, 2002, 33 : 2163 - 2172
  • [9] Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy
    Li, WC
    Liang, C
    Lin, ST
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (07): : 2163 - 2172
  • [10] Effect of Sn Content on the Microstructure, Mechanical and Electrical Properties of Ti2AlC/Cu Joints Brazed with Cu-Sn-Ti Filler Alloy
    Zhang, Jie
    Wang, Guochao
    Zheng, Yi
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING VII, 2013, 762 : 602 - +
12345