Parametric Design on Internal Gear of Cycloid Gear Pump with NX10.0

被引：3
|
作者：
Zhang, Enguang [1 ]
Chen, Min [1 ]
Deng, Baoqing [1 ]
机构：
[1] Jilin Univ, Zhuhai Coll, Zhuhai 519041, Peoples R China
来源：
3RD ANNUAL INTERNATIONAL WORKSHOP ON MATERIALS SCIENCE AND ENGINEERING (IWMSE2017) | 2017年 / 250卷
关键词：
D O I：
10.1088/1757-899X/250/1/012068
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The parametric equation of the theoretical contour curve of cycloid gear was established in this paper. Using the NX10.0 software, parametric design of cycloidal gear profile curve was carried out, and the radius of curvature with the contour curve of cycloid gear was analyzed. The consistency between the simulation results and the theoretical design results was verified by assembly analysis, and the parametric drive of the cycloidal gear was verified simultaneously.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Parametric Design of Cycloid Gear Based on SolidWorks
    Lei, Lei
    Tao, Ying
    Guan, Tianmin
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 3106 - +
  • [2] Design of Rotor for Internal Gear Pump Using Cycloid and Circular-Arc Curves
    Choi, T. H.
    Kim, M. S.
    Lee, G. S.
    Jung, S. Y.
    Bae, J. H.
    Kim, C.
    JOURNAL OF MECHANICAL DESIGN, 2012, 134 (01)
  • [3] Design and analysis of internal compound cycloid gear transmission with high contact ratio
    Gui X.
    Zhan J.
    Ye P.
    Li H.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2017, 53 (01): : 55 - 64
  • [4] Design and investigation of a cycloid helical gear drive
    Xuan Li
    Chaoyang Li
    Bingkui Chen
    Dong Liang
    Journal of Mechanical Science and Technology, 2017, 31 : 4329 - 4336
  • [5] Research on design and layered milling for cycloid gear
    Gu, Lizhi
    Xu, Jianmin
    Luo, Shanming
    Energy Education Science and Technology Part A: Energy Science and Research, 2014, 32 (05): : 4265 - 4272
  • [6] Design and investigation of a cycloid helical gear drive
    Li, Xuan
    Li, Chaoyang
    Chen, Bingkui
    Liang, Dong
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (09) : 4329 - 4336
  • [7] Modeling an Internal Gear Pump
    Chen, Zongbin
    Xu, Rongwu
    He, Lin
    Liao, Jian
    6TH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN, MANUFACTURING, MODELING AND SIMULATION (CDMMS 2018), 2018, 1967
  • [8] Design and machining of the epicycloid planet gear of cycloid drives
    Ta-Shi Lai
    The International Journal of Advanced Manufacturing Technology, 2006, 28 : 665 - 670
  • [9] Design and machining of the epicycloid planet gear of cycloid drives
    Lai, TS
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 28 (7-8): : 665 - 670
  • [10] Design and machining of the epicycloid planet gear of cycloid drives
    Lai, Ta-Shi
    International Journal of Advanced Manufacturing Technology, 2006, 28 (7-8): : 665 - 670
12345