Effect of Silica Aerogel Additive on Mechanical Properties of the Sugar Palm Fiber-Reinforced Polyester Composites

被引:9
|
作者
Shahroze, R. M. [1 ]
Ishak, M. R. [1 ,2 ]
Sapuan, S. M. [3 ]
Leman, Z. [3 ]
Chandrasekar, M. [1 ]
Asim, M. [2 ]
机构
[1] Univ Putra Malaysia, Dept Aerosp Engn, Serdang 43400, Selangor, Malaysia
[2] Univ Putra Malaysia, Inst Trop Forestry & Forest Prod INTROP, Serdang 43400, Selangor, Malaysia
[3] Univ Putra Malaysia, Dept Mech & Mfg Engn, Serdang 43400, Selangor, Malaysia
关键词
THERMAL-PROPERTIES; ALKALI; BIOCOMPOSITES;
D O I
10.1155/2019/3978047
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Silica aerogel (SA) was used as fillers in the sugar palm/polyester composite (SPF/PE). Their influence on tensile, flexural, and impact properties of the composite was determined by varying the additive concentration from 1-5 wt% in the resin. The findings from the study indicate that both the strength and modulus of SPF/PE improved significantly by adding SA. Maximum tensile, flexural, and impact strength occurred at an optimum filler concentration of 2-3 wt%. Similarly, the highest tensile and flexural modulus was achieved with 5 wt% and 2 wt%, respectively. The microstructure of SA-infused composites revealed less fiber pullout/slippage compared to the composites without filler.
引用
收藏
页数:4
相关论文
共 50 条
  • [1] Effect of Organo-Modified Nanoclay on the Mechanical Properties of Sugar Palm Fiber-reinforced Polyester Composites
    Shahroze, Rao Muhammad
    Ishak, Mohamad Ridzwan
    Salit, Mohd. Sapuan
    Leman, Zulkiflle
    Asim, Mohammad
    Chandrasekar, Muthukumar
    [J]. BIORESOURCES, 2018, 13 (04): : 7430 - 7444
  • [2] Dynamic mechanical properties of sugar palm fiber-reinforced polymer composites: a review
    Mulla, Mohammed Huzaifa
    Norizan, Mohd Nurazzi
    Abdullah, Che Ku
    Rawi, Nurul Fazita Mohammad
    Kassim, Mohamad Haafiz Mohamad
    Salleh, Kushairi Mohd
    Abdullah, Norli
    Norrrahim, Mohd Nor Faiz
    [J]. POLYMER BULLETIN, 2024, 81 (09) : 7737 - 7789
  • [3] Dynamic mechanical properties of sugar palm fiber-reinforced polymer composites: a review
    Mohammed Huzaifa Mulla
    Mohd Nurazzi Norizan
    Che Ku Abdullah
    Nurul Fazita Mohammad Rawi
    Mohamad Haafiz Mohamad Kassim
    Kushairi Mohd Salleh
    Norli Abdullah
    Mohd Nor Faiz Norrrahim
    [J]. Polymer Bulletin, 2024, 81 : 7737 - 7789
  • [4] Effect of Palm Tree Fiber Orientation on Electrical Properties of Palm Tree Fiber-reinforced Polyester Composites
    Ben Amor, Ines
    Rekik, H.
    Kaddami, H.
    Raihane, M.
    Arous, M.
    Kallel, A.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2010, 44 (13) : 1553 - 1568
  • [5] Mechanical properties of black sugar palm fiber-reinforced concrete
    Ferdiansyah, T.
    Razak, H. Abdul
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2011, 30 (11) : 994 - 1004
  • [6] Effect of enzymatic pretreatment on the mechanical properties of jute fiber-reinforced polyester composites
    Karaduman, Y.
    Gokcan, D.
    Onal, L.
    [J]. JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (10) : 1293 - 1302
  • [7] Mechanical properties of pineapple leaf fiber-reinforced polyester composites
    Devi, LU
    Bhagawan, SS
    Thomas, S
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1997, 64 (09): : 1739 - 1748
  • [8] Effect of fiber treatments on mechanical properties of coir or oil palm fiber reinforced polyester composites
    Hill, CAS
    Khalil, HPSA
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2000, 78 (09) : 1685 - 1697
  • [9] Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites
    Nurazzi, N. Mohd
    Khalina, A.
    Chandrasekar, M.
    Aisyah, H. A.
    Rafiqah, S. Ayu
    Ilyas, R. A.
    Hanafee, Z. M.
    [J]. POLIMERY, 2020, 65 (02) : 115 - 124
  • [10] Effect of Surface Treatment on the Mechanical Properties of Sugar Palm/Glass Fiber-reinforced Thermoplastic Polyurethane Hybrid Composites
    Atiqah, A.
    Jawaid, Mohammad
    Sapuan, S. M.
    Ishak, Mohamad Ridzwan
    [J]. BIORESOURCES, 2018, 13 (01): : 1174 - 1188