Design of a Permeator-Against-Vacuum mock-Up for the tritium extraction from PbLi at low speed

被引：10

作者：

D'Auria, Vincenzo ^{[1
]}

Dulla, Sandra ^{[1
]}

Ravetto, Piero ^{[1
]}

Savoldi, Laura ^{[1
]}

Utili, Marco ^{[2
]}

Zanino, Roberto ^{[1
]}

机构：

[1] Politecn Torino, NEMO Grp, Dipartimento Energia, Turin, Italy

[2] ENEA, Ctr Ric Brasimone, Camugnano Bo, Italy

来源：

FUSION ENGINEERING AND DESIGN | 2017年 / 121卷

关键词：

Lithium-Lead; Tritium extraction removal (TER); Permeator Against Vacuum (PAV); LEAD-LITHIUM;

D O I：

10.1016/j.fusengdes.2017.07.006

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

The Permeator Against Vacuum (PAV) is one of the candidate Tritium extraction and removal technology from the Lithium-Lead circulating in the breeding blanket currently under consideration for the EU DEMO. In this work the design of a PAV mock-up, dimensioned for the test in the TRIEX facility at ENEA Brasimone, is presented, together with a structural and fluid-dynamic analysis. The mock-up consists of parallel helical vanadium pipes inserted in a vacuum vessel, where the Tritium permeates from the PbLi. The extraction efficiency of the mock-up is computed using an established Tritium permeation model, demonstrating that the mock-up reaches the target 80% efficiency in nominal conditions. (C) 2017 EURATOM. Published by Elsevier B.V. All rights reserved.

引用

页码：198 / 203

页数：6

共 18 条

[1] Engineering design of a Permeator Against Vacuum mock-up with niobium membrane
Papa, F.
Utili, M.
Venturini, A.
Caruso, G.
Savoldi, L.
Bonifetto, R.
Valerio, D.
Allio, A.
Collaku, A.
Tarantino, M.
FUSION ENGINEERING AND DESIGN, 2021, 166
[2] Tritium Extraction from Lithium-Lead Eutectic Alloy: Experimental Characterization of a Permeator against Vacuum Mock-Up at 450?
Papa, Francesca
Venturini, Alessandro
Martelli, Daniele
Utili, Marco
ENERGIES, 2023, 16 (07)
[3] Manufacturing of PAV-ONE, a Permeator against Vacuum Mock-Up with Niobium Membrane
Papa, Francesca
Venturini, Alessandro
Caruso, Gianfranco
Bassini, Serena
Ciantelli, Chiara
Fiore, Angela
Cuzzola, Vincenzo
Denti, Antonio
Utili, Marco
ENERGIES, 2023, 16 (14)
[4] Design of a permeator against vacuum for tritium extraction from eutectic lithium-lead in a DCLL DEMO
Garcinuno, Belit
Rapisarda, David
Fernandez, Ivan
Moreno, Carlos
Palermo, Iole
Ibarra, Angel
FUSION ENGINEERING AND DESIGN, 2017, 117 : 226 - 231
[5] Optimizing tritium extraction from a Permeator Against Vacuum (PAV) by dimensional design using different tritium transport modeling tools
Martinez, P.
Moreno, C.
Martinez, I.
Sedano, L.
FUSION ENGINEERING AND DESIGN, 2012, 87 (7-8) : 1466 - 1470
[6] VACUUM PERMEATOR ANALYSIS FOR EXTRACTION OF TRITIUM FROM DCLL BLANKETS
Humrickhouse, Paul W.
Merrill, Brad J.
FUSION SCIENCE AND TECHNOLOGY, 2015, 68 (02) : 295 - 302
[7] Numerical simulation of tritium extraction from LiPb by vacuum permeator
Deng, Li
An, Yongtao
Luo, Junhong
Wang, Jingchuan
Wen, Ming
Chen, Changan
Song, Jiangfeng
FUSION ENGINEERING AND DESIGN, 2020, 160
[8] Testing of PAV-ONE, a Permeator Against Vacuum mock-up with niobium membrane, in lithium-lead eutectic at 350 °C
Venturini, Alessandro
Papa, Francesca
Alberghi, Ciro
Martelli, Daniele
Utili, Marco
Fsn-ing, Enea
FUSION ENGINEERING AND DESIGN, 2024, 200
[9] Tritium Extraction from Lithium-Lead in the EU DEMO Blanket Using Permeator Against Vacuum
D'Auria, V.
Dulla, S.
Ravetto, P.
Savoldi, L.
Utili, M.
Zanino, R.
FUSION SCIENCE AND TECHNOLOGY, 2017, 71 (04) : 537 - 543
[10] Evolution in design — from mock-up to three-dimensional model
A. Sh. Brodskii
V. N. Nikolaenko
A. V. Pereladov
Chemistry and Technology of Fuels and Oils, 2006, 42 : 352 - 357

← 1 2 →