Comparison of Microstructures at As Welded Zone and Reheated Zone in 9%Ni Steel Similar Composition Weld Metal

被引:3
|
作者
Nako, H. [1 ]
Okazaki, Y. [1 ]
Takeda, H. [2 ]
Suenaga, K. [3 ]
Nakanishi, K. [3 ]
机构
[1] Kobe Steel Ltd, Mat Res Lab, Kobe, Hyogo, Japan
[2] Kobe Steel Ltd, Res & Dev Planning Dept, Kobe, Hyogo, Japan
[3] Kobe Steel Ltd, Welding Co, Kobe, Hyogo, Japan
来源
THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷
关键词
9%Ni steel similar composition weld metal; Microstructure; Nucleation; Solidification segregation;
D O I
10.4028/www.scientific.net/MSF.638-642.3693
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
9%Ni steel similar composition weld wires are applied for constructions of liquefied natural gas storage tanks by gas tungsten arc welding and the weld metals show high toughness and strength level. In this study, the microstructures of 9%Ni steel similar composition weld metals have been investigated. It was found that fine microstructure was formed at the reheated zone and contributed to the high toughness level. The nucleation rate of blocks and packets from prior-austenite grain boundaries was larger at the reheated zone than the as-welded zone and resulted in the fine microstructure of the reheated zone. Our results showed that the lowering of Ni concentration at and near the prior austenite grain boundaries by the reverse transformation caused the larger nucleation rate at the reheated zone.
引用
收藏
页码:3693 / +
页数:2
相关论文
共 50 条
  • [1] RELATIONSHIP BETWEEN MICROSTRUCTURE AND TOUGHNESS IN WELD METAL AND ITS REHEATED ZONE OF HIGH STRENGTH STEEL.
    Kikuta, Yoneo
    Araki, Takao
    Yoneda, Masafumi
    Technology Reports of the Osaka University, 1987, 37 (1865-1888): : 75 - 83
  • [2] A study of fracture toughness and microstructures in the weld heat-affected zone of QLT-processed 9% Ni steel
    Jang, J
    Yang, Y
    Kim, W
    Kwon, D
    ADVANCES IN CRYOGENIC ENGINEERING MATERIALS, VOL 44, PTS A AND B, 1998, 44 : 41 - 48
  • [3] Weld metal impact toughness of electron beam welded 9% Ni steel
    Kim, SH
    Kang, CY
    Bang, KS
    JOURNAL OF MATERIALS SCIENCE, 2001, 36 (05) : 1197 - 1200
  • [4] Weld metal impact toughness of electron beam welded 9% Ni steel
    S.-H. Kim
    C.-Y. Kang
    K.-S. Bang
    Journal of Materials Science, 2001, 36 : 1197 - 1200
  • [5] The Characteristics of Weld Metal Zone Welded with Various Filler Metals
    Moon, Kyung-Man
    Nam, Mun-Jin
    Lee, Yeon-Chang
    Kim, Yun-Hae
    Jeong, Jae-Hyun
    MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 2673 - +
  • [6] Weld defects and precipitates of deposited metal in 9Ni steel welded joint
    Ma, Chengyong
    Qi, Yanchang
    Zhang, Yuqing
    Wu, Zhiquan
    Zhang, Xin
    MATERIALS SCIENCE-POLAND, 2022, 40 (01): : 25 - 48
  • [7] Microstructure and toughness of intercritically reheated heat affected zone in reactor pressure vessel steel weld
    Kweon, KS
    Kim, JH
    Hong, JH
    Lee, CH
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2000, 5 (03) : 161 - 167
  • [8] Fusion zone microstructures of laser and plasma welded dissimilar steel joints
    Sun, Z
    MATERIALS AND MANUFACTURING PROCESSES, 1999, 14 (01) : 37 - 52
  • [9] EFFECT OF HYDROGEN ON PROPERTIES OF WELD ZONE METAL OF WELDED-JOINTS IN A HARDENABLE STEEL DURING AGING
    AMOSOV, VA
    WELDING PRODUCTION, 1976, 23 (08): : 14 - 17
  • [10] Microstructures and Mechanical Properties of Weld Metal and Heat-Affected Zone of Electron Beam-Welded Joints of HG785D Steel
    Zhang, Qiang
    Han, Jianmin
    Tan, Caiwang
    Yang, Zhiyong
    Wang, Junqiang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (12) : 5522 - 5529