Influence of long-term storage in cold hibernation on strain recovery and recovery stress of polyurethane shape memory polymer foam

被引:88
|
作者
Tey, SJ
Huang, WM
Sokolowski, WM
机构
[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 639798, Singapore
[2] CALTECH, Jet Prop Lab, Pasadena, CA 91109 USA
来源
SMART MATERIALS & STRUCTURES | 2001年 / 10卷 / 02期
关键词
D O I
10.1088/0964-1726/10/2/318
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
In this paper, the effects of long-term storage in compressed cold hibernated elastic memory (CHEM) polyurethane foam, a kind of shape memory polymer, are investigated experimentally. The foams were pre-strained at a high temperature, which was above the glass transition temperature, to 80% and 93.4%, respectively, and then cooled back to room temperature. After various periods of cold hibernation (up to two months), they were heated up at fixed length or against different constant loads. It is found that: (1) the maximum stress that the foam could exert at fixed length depends heavily on the amount of pre-strain; (2) expansion rates of 380 and 1273% from the hibernated size against a 1 N load (pre-strained by 80 and 93.4%, respectively) are achievable. However, upon further increases in load, the expansion is reduced dramatically. It appears that the tested CHEM polyurethane foam retains its shape memory properties even after being stored in a compacted state for a long period. Complete strain recovery is attainable for a hibernation period of up to two months.
引用
收藏
页码:321 / 325
页数:5
相关论文
共 50 条
  • [1] Shape recovery and irrecoverable strain control in polyurethane shape-memory polymer
    Tobushi, Hisaaki
    Hayashi, Syunichi
    Hoshio, Kazumasa
    Ejiri, Yoshihiro
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2008, 9 (01)
  • [2] Influence of Holding Time on Shape Recovery in a Polyurethane Shape-Memory Polymer
    Santiago, David
    Ferrando, Francesc
    De la Flor, Silvia
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (07) : 2567 - 2573
  • [3] Influence of Holding Time on Shape Recovery in a Polyurethane Shape-Memory Polymer
    David Santiago
    Francesc Ferrando
    Silvia De la Flor
    Journal of Materials Engineering and Performance, 2014, 23 : 2567 - 2573
  • [4] Influence of strain-holding conditions on shape recovery and secondary-shape forming in polyurethane-shape memory polymer
    Tobushi, H.
    Hayashi, S.
    Hoshio, K.
    Miwa, N.
    SMART MATERIALS & STRUCTURES, 2006, 15 (04): : 1033 - 1038
  • [5] The influence of shape-holding conditions on shape recovery of polyurethane-shape memory polymer foams
    Tobushi, H
    Matsui, R
    Hayashi, S
    Shimada, D
    SMART MATERIALS & STRUCTURES, 2004, 13 (04): : 881 - 887
  • [6] Shape fixity and shape recovery in a film of shape memory polymer of polyurethane series
    Tobushi, H
    Hashimoto, T
    Ito, N
    Hayashi, S
    Yamada, E
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 1998, 9 (02) : 127 - 136
  • [7] Shape fixity and shape recovery in a film of shape memory polymer of polyurethane series
    Tobushi, H
    Ito, N
    Takata, K
    Hayashi, S
    JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 1080 - 1083
  • [8] Shape fixity and shape recovery of polyurethane shape-memory polymer foams
    Tobushi, H
    Shimada, D
    Hayashi, S
    Endo, M
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2003, 217 (L2) : 135 - 143
  • [9] CHARACTERIZING AND MODELING THE FREE RECOVERY AND CONSTRAINED RECOVERY BEHAVIOR OF A POLYURETHANE SHAPE MEMORY POLYMER
    Volk, Brent L.
    Lagoudas, Dimitris C.
    Maitland, Duncan J.
    PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2010, VOL. 1, 2010, : 253 - 260
  • [10] Characterizing and modeling the free recovery and constrained recovery behavior of a polyurethane shape memory polymer
    Volk, Brent L.
    Lagoudas, Dimitris C.
    Maitland, Duncan J.
    SMART MATERIALS & STRUCTURES, 2011, 20 (09):