A review paper on aluminium-alumina arrangement of composite materials in automotive brakes

被引：3
|
作者：
Venugopal, S. [1 ]
Karikalan, L. [1 ]
机构：
[1] VELS Inst Sci Technol & Adv Studies VISTAS, Dept Automobile Engn, Chennai 600117, Tamil Nadu, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷
关键词：
Composites; Sic particle; Alumina-aluminium structure; CuSiCpMMC materials; Al-MMC disks; FRICTION; WEAR;
D O I：
10.1016/j.matpr.2019.05.452
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The two level composite of co perpetual aluminium-alumina arrangement is to circumvent SiC particle which provides thermal conductivity. The Wear of CuSiCpMMC material is analysed by utilizing scam electron as well as optical microscopy of wear cicatrices. The tribological inadequacies of the single phase material and categorical function of sundry type of additives were outlined. The results of test withal show is that a friction material with the steel fiber is not well-matched with the Al-MMC disk because of astringent materials as well as erratic friction comportment through descending at elevated temperature. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：320 / 323
页数：4
相关论文
共 15 条
  • [1] Laser cutting of aluminium-alumina metal matrix composite
    Marimuthu, S.
    Dunleavey, J.
    Liu, Y.
    Antar, M.
    Smith, B.
    OPTICS AND LASER TECHNOLOGY, 2019, 117 : 251 - 259
  • [2] Influence of alumina percentage on hot deformation of aluminium-alumina matrix composite
    Samiee, A.
    Meratian, M.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2015, 28 (01) : 47 - 49
  • [3] Comparative Study of Aluminium-Alumina Composite Prepared by Mechanical Mixing and Oxidation
    Mahato, Jayanta Kumar
    ADVANCES IN LIGHTWEIGHT MATERIALS AND STRUCTURES, ACALMS 2020, 2020, 8 : 329 - 339
  • [4] Densification in aluminium-alumina composite sintered preforms during cold deformation
    Inigoraj, AJR
    Narayanasamy, R
    Pandey, KS
    METALS MATERIALS AND PROCESSES, 1998, 10 (02): : 167 - 175
  • [5] Some aspects on cold forging of aluminium-alumina powder metallurgy composite under triaxial stress state condition
    Narayanasamy, R.
    Ramesh, T.
    Pandey, K. S.
    MATERIALS & DESIGN, 2008, 29 (06) : 1212 - 1227
  • [6] Preparation Methods for Electron-Scanning and Light-Microscopic Analysis of Composite Peened Aluminium-Alumina Particle Composites
    Seitz, M.
    Karch, L.
    Weidenmann, K. A.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2020, 57 (08): : 536 - 544
  • [7] Economical Assembly of Aluminium Parts with Composite Materials in Automotive Competitive Industry
    Arenas, J. M.
    Alia, C.
    Narbon, J. J.
    Ocana, R.
    Recio, M. M.
    ADVANCES IN MATERIALS PROCESSING TECHNOLOGIES, 2012, 498 : 67 - 72
  • [8] Localised surface modification of high-strength aluminium-alumina metal matrix composite coatings using cold spraying and friction stir processing
    Jibran, Wania
    Wanjara, Priti
    Baradari, Javad Gholipour
    Jarligo, Maria Ophelia
    McDonald, Andre
    ADVANCES IN APPLIED CERAMICS, 2023, 122 (3-4) : 181 - 196
  • [9] Effect of geometric work-hardening and matrix work-hardening on new constitutive relationship for aluminium-alumina P/M composite during cold upsetting
    Narayanasamy R.
    Anandakrishnan V.
    Pandey K.S.
    International Journal of Mechanics and Materials in Design, 2008, 4 (3) : 301 - 315
  • [10] Fabrication and characterisation of alumina/aluminium composite materials with a nacre-like micro-layered architecture
    Wan, Hongbo
    Leung, Nathanael
    Jargalsaikhan, Urangua
    Ho, Eric
    Wang, Chaolin
    Liu, Qiang
    Peng, Hua-Xin
    Su, Bo
    Sui, Tan
    MATERIALS & DESIGN, 2022, 223
12