Unsteady aerodynamic performance analysis of an airborne wind turbine under load varying conditions at high altitude

The blade air loads of the Airborne Wind Turbine (AWT) may be significantly influenced by the unsteady flow-field at high altitude. Under these susceptible situations, the rotor needs in-depth considerations with respect to transient aspects. The present study focuses on the unsteady aerodynamic performance of stand-alone rotor under the influence of wind shear, yawed, and tilted configurations. The Computational Fluid Dynamics (CFD) transient simulations based on the sliding mesh approach are carried out for analyzing the unsteady behavior of the rotor by lifting the rotor assembly at an airborne altitude from the ground. All simulations are conducted at optimal operating conditions of wind speed and tip speed ratio. In-house Unsteady Blade Element Momentum (UBEM) code using the wind shear, dynamic stall, dynamic wake, and yaw/tilt model are applied to acquire an empirical assessment in terms of rotor torque, thrust, and power coefficient. Finally, the CFD simulated results are compared against the performance curves generated by the UBEM model and acceptable agreement is found within 4.1% deviation at peak operational conditions. The results further reveal that the time-varying aerodynamic loads on the rotor blade gradually achieve steady behavior after three rotation periods. Meanwhile, unique similarities are found in yawed and tilted inflow cases and a 10.7% loss in power coefficient is observed due to rotor yawed inflows. Additionally, in the absence of tower shadows, the strong flow interactions around the rotor blade impose a positive impact on power output. Despite the complexity of unsteady flow phenomena, this present study would be helpful to design a more proficient airborne rotor under the varying load conditions.