Effect of Electroless Coating Parameters on Ni-YSZ Composite Coating

被引：0
|
作者：
Baba, Nor B.
Waugh, W.
Davidson, A.
机构：
来源：
PROCEEDINGS OF 2010 INTERNATIONAL CONFERENCE ON CHEMICAL ENGINEERING AND APPLICATIONS | 2010年
关键词：
Electroless coating; nickel; YSZ; composite; design of experiment; SURFACE;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
This paper presents a study on the effect of electroless coating parameters on nickel (Ni) to yittria stabilized zirconia (YSZ) ratio in Ni-YSZ composite coatings. A multifactor design of experiment (DOE) approach was used to integrate four coating parameters at two levels. Through analysis of variance (ANOVA) it was found that the particle size and pH are the most significant parameters affecting the deposition process. These two parameters were independent of each other. The optimal coating parameter combination for minimum Ni-content is A+1B-1C-1.
引用
收藏
页码：67 / 71
页数：5
相关论文
共 50 条
  • [1] Investigation of Ni-YSZ composite manufactured by electroless Ni coating
    Baba, Nor Bahiyah
    Davidson, Alan
    Muneer, Tariq
    ADVANCES IN MECHANICAL ENGINEERING, PTS 1-3, 2011, 52-54 : 1660 - +
  • [2] Development of Ni-YSZ cermet anode for solid oxide fuel cells by electroless Ni coating
    Bauri, Ranjit
    JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, 2012, 9 (02) : 229 - 234
  • [3] Electroless Ni-P-SiC composite coating
    Yu, SJ
    Song, LX
    Huang, YS
    Zhao, RG
    Hu, XF
    JOURNAL OF INORGANIC MATERIALS, 2004, 19 (03) : 647 - 652
  • [4] Monte Carlo Study on the Constraint Effect of YSZ Phase on Ni Sintering in Ni-YSZ Composite System
    Hara, S.
    Shikata, K.
    Shikazono, N.
    Izumi, S.
    Sakai, S.
    SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 2857 - 2863
  • [5] Development of Ni–YSZ cermet anode for solid oxide fuel cells by electroless Ni coating
    Ranjit Bauri
    Journal of Coatings Technology and Research, 2012, 9 : 229 - 234
  • [6] Electroless plating of Ni-P-CNTs composite coating
    Zhao, GG
    Deng, FM
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1445 - 1448
  • [7] Effect of electroless coating parameters and ceramic particle size on fabrication of a uniform Ni-P coating on SiC particles
    Khosroshahi, N. Beigi
    Khosroshahi, R. Azari
    Mousavian, R. Taherzadeh
    Brabazon, D.
    CERAMICS INTERNATIONAL, 2014, 40 (08) : 12149 - 12159
  • [8] Pulsed constant voltage electrophoretic deposition of YSZ electrolyte coating on conducting porous Ni-YSZ cermet for SOFCs applications
    Oskouyi, Omid Ekhlasi
    Shahmiri, Mohammad
    Maghsoudipour, Amir
    Hasheminiasari, Masood
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 785 : 220 - 227
  • [9] Statistical Investigation on Effect of Electroless Coating Parameters on Coating Morphology of Short Basalt Fiber
    Vannan, S. Ezhil
    Vizhian, S. Paul
    JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2014, 8 (03): : 153 - 160
  • [10] Friction and Wear of Electroless Ni-P-CS Composite Coating
    Zhang, Xiaoli
    Wang, Heming
    Liu, Guiqun
    METALS, 2023, 13 (02)
12345