Case Study on Numerical Calculation of a Disc Bush in the Disc Harrow in the Welding Version

The optimization of production processes in companies comes down to two main measures influencing the economic factor. The first one is the reduction of interval micro-periods between operations, and the second is to use post-production waste as much as possible. These treatments apply to virtually all industries regardless of the final product effect. This article describes the application of a special welding device for welding the workpiece with a bush type, designed for fixing the plate in the plate gun. As a result of its application, a significant reduction of time needed to produce one bush has been achieved, and thus the amount of time in a unit of time has been increased. As part of the implementation work, the bush design changes were also made, which made it possible to reduce post-production waste not suitable for current production, but allowing its use for other purposes. The results of the work were implemented in the company producing agricultural machinery in Lublin.