Performance improvement of a drop-on-demand inkjet printhead using an optimization-based feedforward control method

被引：61
|
作者：
Khalate, Amol A. [1 ]
Bombois, Xavier [1 ]
Babuska, Robert [1 ]
Wijshoff, Herman [2 ]
Waarsing, Rene [2 ]
机构：
[1] Delft Univ Technol, Delft Ctr Syst & Control, NL-2628 CD Delft, Netherlands
[2] Oce Technol BV, NL-5900 MA Venlo, Netherlands
来源：
CONTROL ENGINEERING PRACTICE | 2011年 / 19卷 / 08期
关键词：
Inkjet printhead; Feedforward control; Optimization;
D O I：
10.1016/j.conengprac.2011.02.007
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The printing quality delivered by a drop-on-demand (DoD) inkjet printhead is limited due to the residual oscillations in the ink channel. The maximal jetting frequency of a DoD inkjet printhead can be increased by quickly damping the residual oscillations and by bringing in this way the ink channel to rest after jetting the ink drop. This paper proposes an optimization-based method to design the input actuation waveform for the piezo actuator in order to improve the damping of the residual oscillations. A discrete-time transfer function derived from the narrow-gap model is used to predict the response of the ink channel under the application of the piezo input. Simulation and experimental results are presented to show the applicability of the proposed method. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码：771 / 781
页数：11
相关论文
共 50 条
  • [1] Optimization-Based Feedforward Control for a Drop-on-Demand Inkjet Printhead
    Khalate, Amol A.
    Bombois, Xavier
    Babuska, Robert
    Wijshoff, Herman
    Waarsing, Rene
    2010 AMERICAN CONTROL CONFERENCE, 2010, : 2182 - 2187
  • [2] Drop-on-Demand Inkjet Printhead Performance Improvement Using Robust Feedforward Control
    Khalate, Amol A.
    Bayon, Benoit
    Bombois, Xavier
    Scorletti, Gerard
    Babuska, Robert
    2011 50TH IEEE CONFERENCE ON DECISION AND CONTROL AND EUROPEAN CONTROL CONFERENCE (CDC-ECC), 2011, : 4183 - 4188
  • [3] Performance Improvement of a Drop-on-Demand Inkjet Print head: a Feedforward Control Based Approach
    Khalate, Amol A.
    Bombois, Xavier
    Babuska, Robert
    Scorletti, Gerard
    Koekebakker, Sjirk
    Wijshoff, Herman
    de Zeeuw, Wim
    Waarsing, Rene
    DIGITAL FABRICATION 2011/ NIP27- 27TH INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES: TECHNICAL PROGRAMS AND PROCEEDINGS, 2011, 2011, : 74 - 78
  • [4] A drop-on-demand inkjet printhead for a wide range of applications
    Kretschmer, J
    IS&T'S NIP14: INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, PROCEEDINGS, 1998, : 31 - 35
  • [5] Development of drop-on-demand piezoelectric line inkjet printhead
    Hirota, A
    Ishikura, S
    IS&T'S NIP21: INTERNATIONAL CONFERENCE ON DIGITAL PRINTING TECHNOLOGIES, FINAL PROGRAM AND PROCEEDINGS, 2005, : 257 - 263
  • [6] Droplet Trajectory Movement Modeling Using a Drop-on-Demand Inkjet Printhead Simulations
    Tofan, Tim
    Borodinas, Sergejus
    Jasevicius, Raimondas
    MATHEMATICS, 2025, 13 (02)
  • [7] Control of Particle Size in Energetic Drop-on-demand Inkjet Method
    Zhang, Ruirui
    Luo, Jun
    Lian, Hongcheng
    Liu, Haobo
    Qi, Lehua
    2017 IEEE INTERNATIONAL CONFERENCE ON MANIPULATION, MANUFACTURING AND MEASUREMENT ON THE NANOSCALE (3M-NANO), 2017, : 335 - 338
  • [8] Control of crystal morphology in energetic drop-on-demand inkjet method
    Zhang R.
    Luo J.
    Lian H.
    Qi L.
    International Journal of Nanomanufacturing, 2020, 16 (04) : 340 - 354
  • [9] Modeling 3D Droplet Movement Using a Drop-on-Demand Inkjet Printhead Model
    Tofan, Tim
    Borodinas, Sergejus
    Kacianauskas, Rimantas
    Jasevicius, Raimondas
    PROCESSES, 2022, 10 (08)
  • [10] Model-Free Optimization Based Feedforward Control for an Inkjet Printhead
    Ezzeldin, M.
    van den Bosch, P. P. J.
    Jokic, A.
    Waarsing, R.
    2010 IEEE INTERNATIONAL CONFERENCE ON CONTROL APPLICATIONS, 2010, : 967 - 972
12345