Fast Welding of Chromium Carbide and Nickel Alloy by Spark Plasma Sintering

被引：2

作者：

Liu Guoxi ^{[1
,2
]}

Li Kezhi ^{[1
]}

Leng Xiaoxuan ^{[3
]}

Zhang Jinyong ^{[3
]}

Zhang Fan ^{[3
]}

机构：

[1] Northwestern Polytech Univ, Sch Mat Sci, Xian 710072, Peoples R China

[2] Ordnance Sci Inst China, Ningbo Branch, Yantai 264003, Peoples R China

[3] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China

来源：

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2016年 / 31卷 / 04期

基金：

中国国家自然科学基金;

关键词：

SPS; welding; Cr3C2; Ni; SPS;

D O I：

10.1007/s11595-016-1455-z

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Spark plasma sintering (SPS) was used to weld the ceramics, eg, Cr3C2 and metal, Ni in this paper. It is found that the SPS can weld the Cr3C2 and Ni plates at lower temperatures and shorter holding time comparing with that of hot-pressing (HP). The binding strength was 113 MPa when the temperature was 1000 degrees C by SPS, compared with 10 MPa by HP at the same temperature. SPS remarkably enhances the atom diffusion in welding. Thermodynamics analysis at different welding temperatures and holding times of SPS or HP shows that the local temperature gradient, different from the past effects of by-passing current, is the dominative mechanism of the SPS welding.

引用

页码：835 / 837

页数：3

共 50 条

[1] Fast Welding of Chromium Carbide and Nickel Alloy by Spark Plasma Sintering
刘国玺
LI Kezhi
LENG Xiaoxuan
张金咏
ZHANG Fan
JournalofWuhanUniversityofTechnology(MaterialsScience), 2016, 31 (04) : 835 - 837
[2] Fast welding of chromium carbide and nickel alloy by spark plasma sintering
Guoxi Liu
Kezhi Li
Xiaoxuan Leng
Jinyong Zhang
Fan Zhang
Journal of Wuhan University of Technology-Mater. Sci. Ed., 2016, 31 : 835 - 837
[3] Welding of Titanium and Nickel Alloy by Combination of Explosive Welding and Spark Plasma Sintering Technologies
Malyutina, Yu. N.
Bataev, A. A.
Mali, V. I.
Anisimov, A. G.
Shevtsova, L. I.
INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2015, 2015, 1683
[4] Spark plasma sintering of silicon carbide-nanostructured ferritic alloy composites with chromium carbide barrier layer
Ning, Kaijie
Ju, Hong-Fei
Bawane, Kaustubh
Lu, Kathy
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 700 : 183 - 190
[5] Characterisation of nickel alloy powders processed by spark plasma sintering
Yamanoglu, R.
Bradbury, W.
Karakulak, E.
Olevsky, E. A.
German, R. M.
POWDER METALLURGY, 2014, 57 (05) : 380 - 386
[6] Characterization of graphite-chromium carbide composites manufactured by spark plasma sintering
Pinuela-Noval, Juan
Fernandez-Gonzalez, Daniel
Suarez, Marta
Diaz, Luis Antonio
Verdeja, Luis Felipe
Fernandez, Adolfo
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2023, 106 (09) : 5157 - 5166
[7] SPARK PLASMA SINTERING OF LOW ALLOY STEEL MODIFIED WITH SILICON CARBIDE
Hebda, M.
Debecka, H.
Miernik, K.
Kazior, J.
ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (02) : 503 - 508
[8] Spark plasma sintering of tantalum carbide
Khaleghi, Evan
Lin, Yen-Shan
Meyers, Marc A.
Olevsky, Eugene A.
SCRIPTA MATERIALIA, 2010, 63 (06) : 577 - 580
[9] The Effect of Titanium Carbide and Spark Plasma Sintering Processing on Nickel-Titanium Carbide Composites
Walunj, Ganesh
Bearden, Anthony
Patil, Amit
Larimian, Taban
Christudasjustus, Jijo
Gupta, Rajeev
Borkar, Tushar
METAL-MATRIX COMPOSITES: ADVANCES IN ANALYSIS, MEASUREMENT, AND OBSERVATIONS, 2021, : 65 - 73
[10] Ultra-fast densification of boron carbide by flash spark plasma sintering
Niu, Bo
Zhang, Fan
Zhang, Jinyong
Ji, Wei
Wang, Weimin
Fu, Zhengyi
SCRIPTA MATERIALIA, 2016, 116 : 127 - 130

← 1 2 3 4 5 →