FLOW STRUCTURE OF SUPERSONIC JET FROM A STRAIGHT MICRO-TUBE

被引：0
|
作者：
Hong, Chungpyo [1 ]
Yoshida, Yasuhiro [1 ]
Asako, Yutaka [1 ]
Suzuki, Koichi [1 ]
机构：
[1] Tokyo Univ Sci, Dept Mech Engn, Chiba 2788510, Japan
来源：
PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS AND MINICHANNELS, 2010, PTS A AND B | 2011年
关键词：
SLIP-FLOW;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
In the case of micro-channels, the boundary layer is formed on the walls and it plays a role of a wall of a converging and diverging nozzle. Then, the outlet Mach number is beyond unity even if the tube is straight. Therefore, in the present study, the successive incident and reflected shock waves on underexpanded state jet from a straight micro-tube whose diameter ranges from 150 mu m to 500 mu m were visualized by Schlieren and Shadowgragh methods. The stagnation pressure ranges from 597 to 963 kPa. The flow characteristics on supersonic jet at the micro-tube outlet were also obtained. Also, it is confirmed that Mach number at a straight micro-tube outlet is beyond unity since the shock wave generates from the needle and the Mach number fluctuates in the jet. The experimental correlation for the distance from the micro-tube outlet to the Mach disk as a function of the ratio of stagnation pressure to ambient back pressure was proposed and compared with available correlations in literature.
引用
收藏
页码：467 / 473
页数：7
相关论文
共 50 条
  • [1] Supersonic micro-jet of straight micro-tube exit
    Hong, Chungpyo
    Yoshida, Yasuhiro
    Matsushita, Shinichi
    Ueno, Ichiro
    Asako, Yutaka
    [J]. JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY, 2015, 10 (02):
  • [2] Supersonic micro-jet of straight micro-tube exit
    Department of Mechanical Engineering, Kagoshima University, 1-21-40 Korimoto, Kagoshima
    890-8580, Japan
    不详
    Chiba
    278-8510, Japan
    不详
    54100, Malaysia
    [J]. J. Therm. Sci. Technol., 2
  • [3] SUPERSONIC FLOW AT MICRO-TUBE OUTLET
    Yoshida, Yasuhiro
    Hong, Chungpyo
    Asako, Yutaka
    Suzuki, Koichi
    [J]. IMECE 2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 9, PTS A-C, 2010, : 1935 - 1942
  • [4] Under-Expanded Gaseous Flow at a Straight Micro-Tube Exit
    Yoshimaru, Takahiro
    Asako, Yutaka
    Yamada, Toru
    [J]. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2014, 136 (08):
  • [5] Mach number at outlet plane of a straight micro-tube
    Kawashima, D.
    Yamada, T.
    Hong, C.
    Asako, Y.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (19) : 3420 - 3430
  • [6] MACH NUMBER ON OUTLET PLANE OF A STRAIGHT MICRO-TUBE
    Asako, Y.
    Kawashima, D.
    Yamada, T.
    Hong, C.
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 7A, 2014,
  • [7] Gas flow in a short micro-tube
    Hirsch, E. H.
    [J]. VACUUM, 2014, 108 : 1 - 5
  • [8] FLOW AND HEAT TRANSFER OF MICRO-TUBE BANK
    Koizumi, Yasuo
    Katsuta, Atsushi
    Ohtake, Hiroyasu
    [J]. PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS AND MINICHANNELS, 2010, PTS A AND B, 2011, : 551 - 558
  • [9] EXPERIMENTAL INVESTIGATION OF GASEOUS FLOW IN A MICRO-TUBE
    Yoshida, Yasuhiro
    Hong, Chungpyo
    Asako, Yutaka
    Suzuki, Koichi
    [J]. ICNMM 2009, PTS A-B, 2009, : 383 - 389
  • [10] The Entrance Effect on Gases Flow Characteristics in Micro-tube
    Chengwen Li
    [J]. Journal of Thermal Science, 2009, 18 (04) : 353 - 357
12345