Electrical Characterization and Defect States Analysis of Ag/ITO/MoOx/n-Si/LiFx/Al Carrier Selective Contact Solar Cells Processed at Room-temperature

Carrier-selective contact based silicon heterojunction solar cell of Ag/ITO/MoOx/n-Si/LiFx/Al is fabricated at room-temperature, having a power conversion efficiency of >15% without using any silicon surface passivation layer. For device fabrication; molybdenum oxide (MoOx) and lithium fluoride (LiFx) are used as hole- and electron-selective thin layers on low-cost industrially feasible Cz n-type silicon wafers, respectively. The device characteristics are investigated by dark/light current density-voltage, quantum efficiency, and capacitance-voltage measurements, and also MoOx/n-Si interface states density by admittance spectroscopy. The performance of cell is found to be limited by the detrimental interface defect states at the MoOx/n-Si interface (similar to 2x10(12) eV(-1) cm(-2)), and also high n-Si/LiFx back-surface recombination that is reflected in quantum efficiency response in the longer wavelength region (800 nm to 1100 nm). Small built-in-potential of similar to 0.69 V at the MoOx/n-Si interface is observed from the Mott-Schottky plot, which is led to the open-circuit voltage of device to similar to 0.57 V. The absence of strong inversion layer is due to the presence of large number of interface defect states at the MoOx/n-Si junction, and reverse saturation current density of similar to 4.1 x10(-8) A/cm(2).