Durability and service life prediction of GFRP bars embedded in concrete under acid environment

被引:77
|
作者
Zhou, Jikai [1 ]
Chen, Xudong [1 ]
Chen, Shixue [1 ]
机构
[1] Hohai Univ, Coll Civil & Transportat Engn, Nanjing 210098, Jiangsu, Peoples R China
关键词
POLYMER REINFORCING BARS; MECHANICAL-PROPERTIES; BOND PROPERTIES; FRP REBARS; FIBER; PERFORMANCE; STRENGTH; TEMPERATURE; DEGRADATION; TENSILE;
D O I
10.1016/j.nucengdes.2011.08.038
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
In recent years, glass fiber reinforcing polymers (GFRP) has emerged as an alternative to conventional steel reinforcing bars in concrete structures. The bond behavior of GFRP bars to concrete under acidic environment is important because of increasing acid rain in China nowadays. This paper presents an experimental investigation into comparison of the durability of the bond between GFRP and steel bars to concrete under acid environment. The specimens were subject to corrosion by immersion in acid solutions with different concentration. One hundred and twenty pullout specimens were used to study the effect of different environment on bond strength of GFRP and steel bars to concrete. Experimental results showed that, For GFRP bars, at the end of 75 days of conditioning duration, maximum bond strength loss of 11%, 22%, 17.2% and 14% were observed in tap water, pH = 2, pH = 3, and pH = 4 environment, respectively. For steel bars, at the end of 75 days of conditioning duration, maximum bond strength loss of 19.6% and 12.3% were observed in pH = 2 and pH = 3 environment, respectively. The influence of solution concentration on bond strength of GFRP bars was determined using Arrhenius equation and time shift method (TSF). (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码:4095 / 4102
页数:8
相关论文
共 50 条
  • [1] Durability of GFRP Reinforcing Bars Embedded in Moist Concrete
    Robert, Mathieu
    Cousin, Patrice
    Benmokrane, Brahim
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2009, 13 (02) : 66 - 73
  • [2] Long-term durability prediction models for GFRP bars in concrete environment
    Davalos, Julio F.
    Chen, Yi
    Ray, Indrajit
    JOURNAL OF COMPOSITE MATERIALS, 2012, 46 (16) : 1899 - 1914
  • [3] Influence of sustained stress on the durability of GFRP bars embedded in concrete
    Dejke, V
    Poupard, O
    Nilsson, LO
    Tepfers, R
    Aït-Mokhtar, A
    FIBRE-REINFORCEMENT POLYMER: REINFORCEMENT FOR CONCRETE STRUCTURES, VOLS 1 AND 2, PROCEEDINGS, 2003, : 833 - 842
  • [4] Durability of GFRP bars in the simulated marine environment and concrete environment under sustained compressive stress
    Zhang, Xiuli
    Deng, Zongcai
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 223 : 299 - 309
  • [5] Durability and degradation mechanism of GFRP bars embedded in concrete beams with cracks
    He, X. J.
    Dai, L.
    Yang, W. R.
    PLASTICS RUBBER AND COMPOSITES, 2017, 46 (01) : 17 - 24
  • [6] Bond durability of BFRP and GFRP bars in sulphoaluminate cement concrete under water immersion environment
    Zhao, Jun
    Pan, Haojin
    Wang, Zike
    Duan, Jianxin
    Wang, Peng
    Wang, Fang
    Leung, Christopher K. Y.
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 432
  • [7] Durability of GFRP bars embedded in seawater sea sand concrete in marine environments
    Mai, Guanghao
    Xiong, Zhe
    Zhu, Huanyu
    Zhou, Lingfeng
    Zhou, Haoran
    Li, Lijuan
    CONSTRUCTION AND BUILDING MATERIALS, 2025, 458
  • [8] Assessment and Prediction Model of GFRP Bars' Durability Performance in Seawater Environment
    Li, Wenchao
    Wen, Fusheng
    Zhou, Min
    Liu, Fusheng
    Jiao, Yuzhao
    Wu, Qingfeng
    Liu, Hengan
    BUILDINGS, 2022, 12 (02)
  • [9] Durability and long-term life prediction of hybrid FRP bars embedded in SSC under seawater environment
    Xu, Aiyan
    Du, Yunxing
    Guo, Aofei
    Pan, Wanping
    Zhu, Deju
    COMPOSITES PART B-ENGINEERING, 2025, 292
  • [10] The durability life prediction of recycled concrete under chlorate environment
    Chen, Aijiu
    Wang, Jing
    Ge, Zhanfang
    Wu, Ming
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 849 - +