Optimization of Drilling Characteristics using Grey Relational Analysis (GRA) in Glass Fiber Reinforced Polymer (GFRP)

被引：0
|
作者：
Akhil, K. T. [1 ]
Shunmugesh, K. [1 ]
Aravind, S. [1 ]
Pramodkumar, M. [2 ]
机构：
[1] Viswajyothi Coll Engn & Technol, Dept Mech Engn, Kochi 6866702, Kerala, India
[2] Viswajyothi Coll Engn & Technol, Fac Dev & Res, Kochi 6866702, Kerala, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 02期
关键词：
GFRP; Grey Relations; Drilling Parameter Optimization; Surface Finish; Delamination Factor; PERFORMANCE-CHARACTERISTICS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Glass Fiber Reinforced Polymers (GFRP) are widely used composite in the arena of automobile and aircraft body fabrication. Aim of this paper is to optimizedrilling parameters for GFRP with multi-objective of Delamination Factor (DF) and Surface Roughness (Ra and Rz) using Grey Relational Analysis (GRA) and Taguchi method. The drilling experiment is designed using Taguchi L (27) (3(13)) orthogonal array with cutting speed, feed rate and drill diameter as the input factors at three different levels. The ANOVA result reveals that the cutting speed is the most significant process parameter which influences the Delamination Factor (DF) and Surface Roughness (Ra and Rz) respectively. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1812 / 1819
页数：8
相关论文
共 50 条
  • [1] Analysis on Drilling of Glass Fiber-Reinforced Polymer (GFRP) Composites Using Grey Relational Analysis
    Palanikumar, K.
    Latha, B.
    Senthilkumar, V. S.
    Davim, J. Paulo
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (03) : 297 - 305
  • [2] Optimization of Drilling Characteristics using Grey-Fuzzy logic in Glass Fiber Reinforced Polymer (GFRP)
    Shunmugesh, K.
    Akhil, K. T.
    Aravind, S.
    Pramodkumar, M.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 8938 - 8947
  • [3] Optimization of input parameters during drilling of glass fiber reinforced polymer composite using grey relational analysis
    Pathak, Shashi Ranjan
    Malik, Anup
    Mali, Harlal Singh
    [J]. INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (06): : 4075 - 4091
  • [4] Optimization of drilling characteristics using Grey Relational Analysis (GRA) in Medium Density Fiber Board (MDF)
    Prakash, S.
    Mercy, J. Lilly
    Salugu, Manoj Kumar
    Vineeth, K. S. M.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 1541 - 1551
  • [5] Optimization of End Milling Parameters for Glass Fiber Reinforced Plastic (GFRP) Using Grey Relational Analysis
    Panneerselvam, K.
    Pradeep, K.
    Asokan, P.
    [J]. INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 : 3962 - 3968
  • [6] OPTIMIZATION OF END MILLING PARAMETERS FOR GLASS FIBER REINFORCED PLASTIC (GFRP) USING GREY RELATIONAL ANALYSIS
    Panneerselvam, K.
    Aravindan, S.
    Haq, A. Noorul
    [J]. ADVANCES IN HETEROGENEOUS MATERIAL MECHANICS 2011, 2011, : 1104 - +
  • [7] Multi-Response Optimization in Drilling of MWCNTs Reinforced GFRP Using Grey Relational Analysis
    Fedai, Yusuf
    Basar, Gokhan
    Kirli Akin, Hediye
    [J]. Tehnicki Vjesnik, 2022, 29 (03): : 742 - 751
  • [8] Multi-Response Optimization in Drilling of MWCNTs Reinforced GFRP Using Grey Relational Analysis
    Fedai, Yusuf
    Basar, Gokhan
    Akin, Hediye Kirli
    [J]. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2022, 29 (03): : 742 - 751
  • [9] Optimization of Process Parameters in Micro-drilling of Carbon Fiber Reinforced Polymer (CFRP) Using Taguchi and Grey Relational Analysis
    Shunmugesh, K.
    Panneerselvam, K.
    [J]. POLYMERS & POLYMER COMPOSITES, 2016, 24 (07): : 499 - 506
  • [10] Optimization of multiple quality characteristics in bone drilling using grey relational analysis
    Pandey, Rupesh Kumar
    Panda, Sudhansu Sekhar
    [J]. JOURNAL OF ORTHOPAEDICS, 2015, 12 (01) : 39 - 45
12345