Boriding of Binary Ni-Ti and Ternary Ni-Ti-Cu Shape Memory Alloys

被引：1

作者：

Ucar, N. ^{[1
]}

Turku, N. ^{[1
]}

Ozdemir, A. F. ^{[1
]}

Calik, A. ^{[2
]}

机构：

[1] Suleyman Demirel Univ, Fac Arts & Sci, Dept Phys, Isparta, Turkey

[2] Suleyman Demirel Univ, Fac Technol, Dept Mfg Engn, Isparta, Turkey

来源：

ACTA PHYSICA POLONICA A | 2016年 / 130卷 / 01期

关键词：

MECHANICAL-PROPERTIES; WEAR BEHAVIOR; CAST IRONS; THIN-FILMS; STEELS; KINETICS;

D O I：

10.12693/APhysPolA.130.492

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

In this work, the boriding of binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was carried out in a solid medium at 1173 K for 8 h using the powder pack method with Ekabor-Ni powders. Characterization of boride layer formed on the surface of alloys was identified by optical microscopy and scanning electron microscopy. TiB2, NiB2 and SiC phases in the boride layer of borided binary (Ni-Ti) and ternary (Ni-Ti-Cu) shape memory alloys was confirmed by X-ray diffraction analysis. The microhardness and thickness of the boride layers were measured. The obtained hardness values show a hardness anomaly due to porosity and structural defects with increase of Cu content, while a decrease in the value of hardness moving from the boride layer to main structure was observed.

引用

页码：492 / 495

页数：4

共 50 条

[1] Boriding of Binary Ni-Ti Shape Memory Alloys
Ucar, Nazim
Dogan, Sule
Karakas, Mustafa Serdar
Calik, Adnan
ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES, 2016, 71 (11): : 1017 - 1020
[2] COMPARATIVE INTERNAL-FRICTION AND MODULUS EVOLUTIONS IN NI-TI AND NI-TI-CU SHAPE MEMORY ALLOYS
GOUBAA, K
MASSE, M
BOUQUET, G
JOURNAL DE PHYSIQUE III, 1992, 2 (08): : 1479 - 1489
[3] EFFICIENCY OF VARIOUS TECHNIQUES IN DETECTING THE R-PHASE IN NI-TI, NI-TI-CU AND NI-TI-CO SHAPE MEMORY ALLOYS
GOUBAA, K
JORDAN, L
MASSE, M
BOUQUET, G
SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (08): : 1163 - 1168
[4] An elasticity of B19′ martensitic phase in Ni-Ti and Ni-Ti-Cu alloys
Sapozhnikov, K.
Golyandin, S.
Kustov, S.
Schaller, R.
Van Humbeeck, J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 442 (1-2): : 398 - 403
[5] A comparative study of Ni-Ti and Ni-Ti-Cu shape memory alloy processed by plasma melting and injection molding
de Araujo, C. J.
da Silva, N. J.
da Silva, M. M.
Gonzalez, C. H.
MATERIALS & DESIGN, 2011, 32 (10) : 4925 - 4930
[6] Effect of Ternary Addition of Cobalt on Shape Memory Characteristics of Ni-Ti Alloys
Santosh, S.
Sampath, V.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1481 - 1484
[7] Internal friction of Ni-Ti and Ni-Ti-Cu plates produced by lamination process
Igata, N
Urahashi, N
Sasaki, M
Kogo, Y
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 370 (1-2): : 560 - 563
[8] THE COMBUSTION SYNTHESIS OF NI-TI SHAPE MEMORY ALLOYS
YI, HC
MOORE, JJ
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1990, 42 (08): : 31 - 35
[9] Shape memory effect of clamped Ni-Ti alloys
Kaneko, Kenichi, 1600, Japan Inst of Metals, Sendai, Japan (58):
[10] REVERSION STRESSES IN NI-TI SHAPE MEMORY ALLOYS
MADANGOPAL, K
KRISHNAN, GR
BANERJEE, S
SCRIPTA METALLURGICA, 1988, 22 (10): : 1593 - 1598

← 1 2 3 4 5 →