Mechanical analysis on the influence of the bonding process on the ultra-thin mirror shell

被引：2
|
作者：
Zuo, Heng [1 ,2 ]
Chen, Kunxing [1 ,2 ]
机构：
[1] Chinese Acad Sci, Nanjing Inst Astron Opt & Technol, Natl Astron Observ, Nanjing 210042, Jiangsu, Peoples R China
[2] Chinese Acad Sci, Nanjing Inst Astron Opt & Technol, Key Lab Astron Opt & Technol, Nanjing 210042, Jiangsu, Peoples R China
来源：
GROUND-BASED AND AIRBORNE TELESCOPES VII | 2018年 / 10700卷
基金：
中国国家自然科学基金;
关键词：
epoxy adhesive; glue; deformable mirror; invar pad; FEA; mirror polishing;
D O I：
10.1117/12.2312354
中图分类号：
P1 [天文学];
学科分类号：
0704 ;
摘要：
The thickness of the thin shell used in the large aperture adaptive mirrors is usually less than 2mm, in contrast the shell's diameter could be larger than several hundred millimeters, so that the shell's stiffness could be low enough to adapt the high frequency deformation. However the shell could very easily be out of shape during the process when the pads were glued onto the mirror, some analysis based on the experiment would be presented in this paper, and force introduced by the glue process could be extracted by the method, so the result could be used during the polishing process to eliminate the influence of the bonding process on the shell.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Controlling distortion in the process of ultra-thin mirror manufacture
    Huang, Qi-Tai
    Guo, Pei-Ji
    Yu, Jing-Chi
    Guangdian Gongcheng/Opto-Electronic Engineering, 2008, 35 (08): : 128 - 133
  • [2] Development of ultra-thin parallel mirror
    Jin, Guangming
    Guangxue Jishu/Optical Technique, 1993, (05): : 31 - 34
  • [3] Mechanical property and modal analysis of ultra-thin mirrors
    Yuan Y.
    Gu C.
    Yan G.
    Fang F.
    Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument, 2018, 39 (06): : 64 - 72
  • [4] Study on machining deformation of the ultra-thin mirror
    Hao, Zhang
    Peng, Wang
    ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES, 2016, 9683
  • [5] Bonding Characteristics Analysis of Ultra-thin Overlay of Asphalt Pavement Layer
    Yang, Yanhai
    Liu, Zhuo
    Gao, Jingxiong
    Zhu, Guangshan
    SUSTAINABLE ENVIRONMENT AND TRANSPORTATION, PTS 1-4, 2012, 178-181 : 1245 - 1249
  • [6] Demonstration and analysis on correction of 0.5 m ultra-thin mirror with active supports
    Zeng, Chun-Mei
    Guo, Pei-Ji
    Yu, Jing-Chi
    Guangxue Jingmi Gongcheng/Optics and Precision Engineering, 2010, 18 (03): : 570 - 578
  • [7] DEVELOPMENT OF ULTRA-THIN MEMS MICRO MIRROR DEVICE
    Takeshita, Toshihiro
    Yamashita, Takahiro
    Makimoto, Natsumi
    Kobayashi, Takeshi
    2017 19TH INTERNATIONAL CONFERENCE ON SOLID-STATE SENSORS, ACTUATORS AND MICROSYSTEMS (TRANSDUCERS), 2017, : 2143 - 2146
  • [8] Manufacturability of the ultra-thin resist process
    Pike, C
    Bell, S
    Plat, M
    King, P
    Nguyen, K
    Lyons, C
    Levinson, H
    Phan, K
    Okoroanyanwu, U
    EMERGING LITHOGRAPHIC TECHNOLOGIES IV, 2000, 3997 : 328 - 333
  • [9] Influence of the atmosphere on ultra-thin oxynitride films by plasma nitride process
    Saki, M
    Shimizu, T
    Mori, S
    Yamamoto, A
    ISSM 2005: IEEE International Symposium on Semiconductor Manufacturing, Conference Proceedings, 2005, : 200 - 203
  • [10] Surface integrity analysis of ultra-thin glass molding process
    Zhang, Zhen
    Yang, Wei
    Ming, Wuyi
    Yin, Ling
    Liao, Dunming
    Zhang, Guojun
    CERAMICS INTERNATIONAL, 2021, 47 (21) : 30584 - 30597
12345