Selective heating and enhanced boiling in microwave heating of multicomponent (solid-liquid) foods

被引:4
|
作者
Gulati, Tushar [1 ]
Datta, Ashim K. [1 ]
Ranjbaran, Mohsen [1 ]
机构
[1] Cornell Univ, Dept Biol & Environm Engn, Riley Robb Hall, Ithaca, NY 14853 USA
关键词
MULTIPHASE TRANSPORT; LARGE-DEFORMATION; POWER ABSORPTION; VEGETABLES; POROSITY;
D O I
10.1111/jfpe.13320
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Selective or enhanced heating of a solid in a solid-liquid mixture in microwaves that can lead to enhanced boiling and possibly bumping was studied. A soup containing broth and particulate foods was heated in a cylindrical container in a standard domestic microwave oven. Heating patterns were obtained using a coupled three dimensional thermal-electromagnetic model, as well as an infrared camera, and boiling was visually observed. Selective heating of the solid particulates over the broth depends on their dielectric and thermal property differential. Enhanced and early boiling on the surface resulting from selective heating also depends on factors that aid in bubble formation and growth such as the surface roughness and porosity (gas pockets) in the solid. For quick prediction of the potential for enhanced heating in product design, a characteristic number was developed that can predict situations that are more prone to enhanced heating than the surrounding liquid. Practical applications When microwave heating of a soup or a soup-like multicomponent mixture of solid and liquid foods, for example carrot or corn pieces in a broth, the solid can end up heating faster than the surrounding liquid, leading boiling to be initiated preferentially at the solid surface, as opposed to in the bulk broth. Depending on the solid material and its surface properties, such a boiling can be further enhanced and sudden, leading to possible bumping during the heating process. A simple design parameter, based on easily available dielectric and thermal properties of the solid and liquid, was developed to quickly predict the possibility of such an enhanced heating of the solid surface (that could eventually lead to bumping). When designing microwaveable products like soups, this simple parameter can be of particular help, reducing the time and resources for experimentation by providing a quick estimate of the probability of enhanced boiling and thus bumping.
引用
收藏
页数:13
相关论文
共 50 条
  • [1] RESPONSE OF SOLID-LIQUID INTERFACE TO INDUCTION HEATING
    TIEN, RH
    KOUMP, V
    [J]. JOURNAL OF METALS, 1968, 20 (12): : A8 - &
  • [2] RESPONSE OF SOLID-LIQUID INTERFACE TO INDUCTION HEATING
    TIEN, RH
    KOUMP, V
    [J]. CHEMICAL ENGINEERING SCIENCE, 1969, 24 (05) : 867 - &
  • [3] Effect of increasing hygroscopicity on the microwave heating of solid foods
    Adu, B
    Otten, L
    [J]. JOURNAL OF FOOD ENGINEERING, 1996, 27 (01) : 35 - 44
  • [4] SOLID-LIQUID SOLUBILITY DETERMINATION BY VARIABLE HEATING RATES
    HERIC, EL
    [J]. JOURNAL OF CHEMICAL AND ENGINEERING DATA, 1967, 12 (01): : 71 - &
  • [5] A numerical investigation of electroconductive heating in solid-liquid mixtures
    Orangi, S
    Sastry, S
    Li, Q
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1998, 41 (14) : 2211 - 2220
  • [6] Models for ohmic heating of solid-liquid mixtures under worst-case heating scenarios
    Salengke, S.
    Sastry, S. K.
    [J]. JOURNAL OF FOOD ENGINEERING, 2007, 83 (03) : 337 - 355
  • [7] Pyrolysis of liquid hexadecane with selective microwave heating of the catalyst
    E. I. Udalov
    V. A. Bolotov
    Yu. Yu. Tanashev
    Yu. D. Chernousov
    V. N. Parmon
    [J]. Theoretical and Experimental Chemistry, 2011, 46 : 384 - 392
  • [8] PYROLYSIS OF LIQUID HEXADECANE WITH SELECTIVE MICROWAVE HEATING OF THE CATALYST
    Udalov, E. I.
    Bolotov, V. A.
    Tanashev, Yu. Yu.
    Chernousov, Yu. D.
    Parmon, V. N.
    [J]. THEORETICAL AND EXPERIMENTAL CHEMISTRY, 2011, 46 (06) : 384 - 392
  • [9] Analysis of solid-liquid phase change under pulsed heating
    Krishnan, Shankar
    Murthy, Jayathi Y.
    Garimella, Suresh V.
    [J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2007, 129 (03): : 395 - 400
  • [10] Analysis of solid-liquid phase change under pulsed heating
    Krishnan, Shankar
    Murthy, Jayathi Y.
    Garimella, Suresh V.
    [J]. PROCEEDINGS OF THE ASME HEAT TRANSFER DIVISION 2005, VOL 1, 2005, 376-1 : 791 - 797