Ventilated brake discs manufactured in aluminium matrix composites and hypereutectic aluminium alloys

被引：0
|
作者：
Goñi, J
Coleto, J
Eguizabal, P
Rubio, A
Garcia, A
Sanchez, J
机构：
[1] Fdn INASMET, San Sebastian 20009, Spain
[2] ETSI, Inst Univ Invest Automovil, Madrid 28031, Spain
来源：
THERMEC'2003, PTS 1-5 | 2003年 / 426-4卷
关键词：
brake disc; casting; aluminium matrix composite; dynamometer testing;
D O I：
10.4028/www.scientific.net/MSF.426-432.2157
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Two different aluminium alloy materials have been used to produce ventilated brake discs, on one hand, AS17G0.6 hypereutectic alloy and on the other hand, AS7G0.6 reinforced with 20% in wt. of SiC particles. The casting production technique used has been Low Pressure Casting (LPC) and some of the brake discs have been heat treated using a T6 treatment. Once the ventilated brake discs were produced and machined, they were tested in a dynamometer in order to compare the performance under service conditions of the aluminium alloy and grey cast iron (GCI) discs currently used in the market.
引用
收藏
页码：2157 / 2161
页数：5
相关论文
共 50 条
  • [1] Characterisation methodology and wear mechanisms of aluminium matrix composite and hypereutectic alloys with brake pads
    Sallit, I
    Richard, C
    Adam, R
    Robbe-Valloire, F
    SURFACE MODIFICATION TECHNOLOGIES XI, 1998, : 944 - 952
  • [2] Bearing aluminium matrix composites manufactured by recycling
    Gronostajski, JZ
    Chmura, W
    METAL FORMING 2000, 2000, : 361 - 366
  • [3] HVOF thermal sprayed coatings on aluminium alloys and aluminium matrix composites
    Picas, JA
    Forn, A
    Rilla, R
    Martín, E
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4): : 1178 - 1181
  • [4] Wear behaviour of aluminium matrix composites manufactured by diecasting
    Zambon, Andrea
    Badan, Brando
    Bonollo, Franco
    Metallurgia Italiana, 2007, 99 (10): : 27 - 33
  • [5] New aluminium matrix composites manufactured by an in-situ process
    LePetitcorps, Y
    Zanardo, N
    Albingre, L
    Imielinska, K
    Coleto, J
    Goñi, J
    Egizabal, P
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 2175 - 2180
  • [6] Structure and properties of deformed hypereutectic aluminium alloys
    Eskin, DG
    EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1: METALS AND COMPOSITES, 1997, : 291 - 294
  • [7] Wear behaviour of cast hypereutectic aluminium silicon alloys
    Dwivedi, DK
    MATERIALS & DESIGN, 2006, 27 (07): : 610 - 616
  • [8] Development of aluminium alloys and metal matrix composites by powder metallurgy
    Ruiz-Navas, E. M.
    Delgado, M. L.
    Torralba, J. M.
    MATERIALS AND TECHNOLOGIES, 2007, 23 : 51 - 58
  • [9] Aluminium precipitates in the primary silicon of as-spray-formed hypereutectic aluminium-silicon alloys
    Hogg, SC
    Hetherington, CJD
    Atkinson, HV
    PHILOSOPHICAL MAGAZINE LETTERS, 2000, 80 (07) : 477 - 482
  • [10] Tribology Behaviour of Alumina Particles Reinforced Aluminium Matrix Composites and Brake Disc Materials
    Ahmad, Faiz
    Lo, S. H. Jason
    Aslam, Muhammad
    Haziq, Ahmad
    INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 2013, 68 : 674 - 680
12345