Microstructure, Tensile Properties, and Corrosion Behavior of Die-Cast Mg-7Al-1Ca-xSn Alloys

被引：14
|
作者：
Wang, Feng [1 ]
Dong, Haikuo [1 ]
Sun, Shijie [1 ]
Wang, Zhi [1 ]
Mao, Pingli [1 ]
Liu, Zheng [1 ]
机构：
[1] Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2018年 / 27卷 / 02期
基金：
中国国家自然科学基金;
关键词：
corrosion resistance; die-cast; magnesium alloys; microstructure; tensile properties; AZ91 MAGNESIUM ALLOY; MECHANICAL-PROPERTIES; CREEP-BEHAVIOR; SN ADDITION; ELEVATED-TEMPERATURE; FRACTURE-BEHAVIOR; AL ALLOYS; PHASE; SR; STABILITY;
D O I：
10.1007/s11665-018-3145-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure, tensile properties, and corrosion behavior of die-cast Mg-7Al-1Ca-xSn (x = 0, 0.5, 1.0, and 2.0 wt.%) alloys were studied using OM, SEM/EDS, tensile test, weight loss test, and electrochemical test. The experimental results showed that Sn addition effectively refined grains and intermetallic phases and increased the amount of intermetallic phases. Meanwhile, Sn addition to the alloys suppressed the formation of the (Mg,Al)(2)Ca phase and resulted in the formation of the ternary CaMgSn phase and the binary Mg2Sn phase. The Mg-7Al-1Ca-0.5Sn alloy exhibited best tensile properties at room temperature, while Mg-7Al-1Ca-1.0Sn alloy exhibited best tensile properties at elevated temperature. The corrosion resistance of studied alloys was improved by the Sn addition, and the Mg-7Al-1Ca-0.5Sn alloy presented the best corrosion resistance.
引用
收藏
页码：612 / 623
页数：12
相关论文
共 50 条
  • [1] Microstructure, Tensile Properties, and Corrosion Behavior of Die-Cast Mg-7Al-1Ca-xSn Alloys
    Feng Wang
    Haikuo Dong
    Shijie Sun
    Zhi Wang
    Pingli Mao
    Zheng Liu
    [J]. Journal of Materials Engineering and Performance, 2018, 27 : 612 - 623
  • [2] Creep rupture properties of die-cast Mg-Al-Ca alloys
    Terada, Yoshihiro
    Itoh, Daigo
    Sato, Tatsuo
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2009, 113 (2-3) : 503 - 506
  • [3] Effect of heat treatment on microstructure and tensile properties of die-cast Al-Cu-Si-Mg alloys
    Cai, Qing
    Mendis, Chamini L.
    Wang, Shihao
    Chang, Isaac T. H.
    Fan, Zhongyun
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 881
  • [4] Micro structures, tensile properties and corrosion behavior of die-cast Mg-4Al-based alloys containing La and/or Ce
    Zhang, Jinghuai
    Zhang, Deping
    Tian, Zheng
    Wang, Jun
    Liu, Ke
    Lu, Huayi
    Tang, Dingxiang
    Meng, Jian
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 489 (1-2): : 113 - 119
  • [5] MICROSTRUCTURE AND TENSILE PROPERTIES OF SQUEEZE CAST Mg-Al-Ca ALLOYS
    Masoumi, Mohsen
    Zhang, Qiang
    Hu, Henry
    [J]. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 771 - 776
  • [6] Microstructure and Tensile Properties of the Mg-6Zn-4Al-xSn Die Cast Magnesium Alloy
    Zhou, Jin
    Nodooshan, Hamid Reza Jafari
    Li, Dejiang
    Zeng, Xiaoqin
    Ding, Wenjiang
    [J]. METALS, 2019, 9 (02)
  • [7] Calculated phase diagrams and the corrosion of die-cast Mg-Al alloys
    Liu, Ming
    Uggowitzer, Peter J.
    Nagasekhar, A. V.
    Schmutz, Patrik
    Easton, Mark
    Song, Guang-Ling
    Atrens, Andrej
    [J]. CORROSION SCIENCE, 2009, 51 (03) : 602 - 619
  • [8] Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg-4Al-based alloy
    Zhang, Jinghuai
    Wang, Jun
    Qiu, Xin
    Zhang, Deping
    Tian, Zheng
    Niu, Xiaodong
    Tang, Dingxiang
    Meng, Jian
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 464 (1-2) : 556 - 564
  • [9] Effect of Mg level on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys
    Yang, Hailin
    Ji, Shouxun
    Yang, Wenchao
    Wang, Yun
    Fan, Zhongyun
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 642 : 340 - 350
  • [10] Microstructure and mechanical properties of new die-cast quaternary Al-Cu-Si-Mg alloys
    Cai, Qing
    Mendis, Chamini L.
    Chang, Isaac T. H.
    Fan, Zhongyun
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 800
12345