Repair welding of cracked shrouds in steam turbines

被引：0
|
作者：
Albert, SK [1 ]
Gill, TPS [1 ]
Bhaduri, AK [1 ]
Iyer, DR [1 ]
机构：
[1] Indira Gandhi Ctr Atom Res, Kalpakkam 603102, Tamil Nadu, India
来源：
CASE HISTORIES ON INTEGRITY AND FAILURES IN INDUSTRY | 1999年
关键词：
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The procedure for repair welding of cracked shrouds in steam turbines has been developed using the gas tungsten are welding process and ER 316L filler wires. The procedure development included selection of welding consumable, optimisation of post weld heat treatment parameters, determination of mechanical properties of weldments in as-welded and PWHT conditions, and selection of suitable method for local PWHT of repair welds. Three different filler wires (ER 309L, ER 316L, and ER NiCr-3) were evaluated during procedure qualification. All these filler wires were of austenitic type and were preferred over matching composition filler wires to avoid preheating of the job and hydrogen induced cold cracking. This procedure has been applied for repair welding of 8 cracked shrouds in 4 steam turbines of 3 Indian nuclear power plants. The details of the procedure development and the experience of in-plant repair welding are presented in this paper.
引用
收藏
页码：863 / 872
页数：10
相关论文
共 50 条
  • [1] Improvement in technology for repair welding of body parts of steam turbines
    Anokhov, A.E.
    [J]. Energetik, 2001, (07): : 21 - 23
  • [2] In situ repair welding of steam turbine shroud for replacing a cracked blade
    S. K. Albert
    C. R. Das
    V. Ramasubbu
    A. K. Bhaduri
    S. K. Ray
    Baldev Raj
    [J]. Journal of Materials Engineering and Performance, 2002, 11 : 243 - 249
  • [3] In situ repair welding of steam turbine shroud for replacing a cracked blade
    Albert, SK
    Das, CR
    Ramasubbu, V
    Bhaduri, AK
    Ray, SK
    Raj, B
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2002, 11 (03) : 243 - 249
  • [4] Perfection of technology of repair welding and heat treatment - basis of prolongation of a resource of steam turbines
    Anokhov, A.E.
    Ganiev, F.B.
    Korol'kov, P.M.
    [J]. Montazhnye i Spetsial'nye Raboty v Stroitel'stve, 2003, (07): : 7 - 12
  • [5] COMPACT SHROUDS FOR WIND TURBINES
    IGRA, O
    [J]. ENERGY CONVERSION, 1977, 16 (04): : 149 - 157
  • [6] Repair solutions for steam and gas turbines
    Gandy, D.
    Viswanathan, V.
    Scheibel, J.
    [J]. Power Engineering (Barrington, Illinois), 2001, 105 (04): : 42 - 44
  • [7] Repair solutions for steam and gas turbines
    Gandy, D
    Viswanathan, V
    Scheibel, J
    [J]. POWER ENGINEERING, 2001, 105 (04) : 42 - 44
  • [8] Welding repair of the steam and gas turbines rotors made of Cr-Mo-V steel
    Mazur, Z
    Kubiak, J
    Hernández, A
    [J]. REVISTA DE METALURGIA, 1999, 35 (02) : 100 - 110
  • [9] Repair welding of cracked steam turbine blades using austenitic and martensitic stainless-steel consumables
    Bhaduri, AK
    Gill, TPS
    Albert, SK
    Shanmugam, K
    Iyer, DR
    [J]. NUCLEAR ENGINEERING AND DESIGN, 2001, 206 (2-3) : 249 - 259
  • [10] Complicated Repair Welding of Cracked Hammerheads.
    Vogt, Alfred
    Wamser, Wilhelm
    Neubert, Eberhard
    [J]. ZIS-Mitteilungen, 1982, 24 (08): : 829 - 842
12345