Improved resolution for soft-x-ray monochromatization using lamellar multilayer gratings

Lamellar Multilayer Gratings (LMG) offer improved resolution for soft-x-ray (SXR) monochromatization, while maintaining a high reflection efficiency in comparison to conventional multilayer mirrors (MM). We previously used a Coupled-Waves Approach (CWA) to calculate SXR diffraction by LMGs and identified a single-order regime in which the incident wave only excites a single diffraction order. We showed that in this regime the angular width of the zeroth-order diffraction peak simply scales linearly with Gamma (lamel-to-period ratio) without loss of peak reflectivity. However, the number of bi-layers must then be increased by a factor of 1/Gamma. Optimal LMG resolution and reflectivity is obtained in this single-order regime, requiring grating periods of only a few hundred nm, lamel widths < 100nm and lamel heights > 1 mu m [1]. For the fabrication of LMGs with these dimensions, we use a novel process based on UV-NanoImprint Lithography (UV-NIL) and Bosch-type Deep Reactive Ion Etching (DRIE). Successful fabrication of LMGs with periods down to 200nm, line widths of 60nm and multilayer stack heights of 1 mu m is demonstrated. SXR reflectivity measurements were performed on these LMGs at the PTB beamline at the BESSYII synchrotron facility. The measurements demonstrate an improvement in resolution by a factor 3,5 compared to conventional MMs. Further analysis of the SXR reflectivity measurements is currently being performed.