Development of Magnesium-Rare Earth Die-Casting Alloys

被引：10

作者：

Easton, Mark ^{[1
]}

Gibson, Mark A. ^{[1
,2
,3
]}

Zhu, Suming ^{[1
]}

Abbott, Trevor ^{[1
,4
]}

Nie, Jian-Feng ^{[3
]}

Bettles, Colleen J. ^{[3
]}

Savage, Gary ^{[2
]}

机构：

[1] RMIT Univ, Sch Engn, Melbourne, Vic 3001, Australia

[2] CSIRO Mfg, Clayton, Vic 3168, Australia

[3] Monash Univ, Dept Mat Sci & Engn, Melbourne, Vic 3800, Australia

[4] Magontec Ltd, Sydney, NSW 2011, Australia

来源：

MAGNESIUM TECHNOLOGY 2018 | 2018年

关键词：

Mg-RE alloys; Creep resistance; Hot tearing; High-pressure die-casting; MG-LA-ND; CREEP RESISTANCE; MICROSTRUCTURE; CE; PRECIPITATION; CORROSION; STRENGTH; NETWORK;

D O I：

10.1007/978-3-319-72332-7_50

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An overview of the development of a high-performance Mg-RE based alloy, HP2+, is presented, which has a good combination of die-castability and mechanical properties at ambient and elevated temperatures. The original alloy, HP2, was a die-casing version of the sand-cast alloy SC1 developed for powertrain applications. However, HP2 tended to crack substantially, leading to unusable castings due to its high Nd content. It was found that the solidification path of Mg-RE alloys can be engineered to reduce the propensity to hot tearing by changing the mixture of RE elements towards La-rich, which leads to an increase in the amount of eutectic and a reduction of the solidification range. Precipitate-forming RE elements, such as Nd or Y, were optimized for HP2+ to meet the requirement for high temperature creep resistance. Whilst some challenges remain with the commercial application of HP2+, the learnings from the alloy design process can be applied to other alloy development programs.

引用

页码：329 / 336

页数：8

共 50 条

[1] On the unexpected formation of rare earth hydrides in magnesium-rare earth casting alloys
Zhu, S. M.
Nie, J. F.
Gibson, M. A.
Eastona, M. A.
[J]. SCRIPTA MATERIALIA, 2014, 77 : 21 - 24
[2] LIGHTER DESIGNS POSSIBLE WITH MAGNESIUM-RARE EARTH CASTING ALLOYS
MCDONALD, JC
[J]. JOURNAL OF METALS, 1952, 4 (03): : 242 - 244
[3] Improving the Strength and Ductility of Magnesium Die-Casting Alloys via Rare-Earth Addition
Bakke, Per
Pettersen, Ketil
Westengen, Håkon
[J]. JOM, 2003, 55 (11) : 46 - 51
[4] Improving the strength and ductility of magnesium die-casting alloys via rare-earth addition
Bakke, P
Pettersen, K
Westengen, H
[J]. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 2003, 55 (11): : A46 - A51
[5] Primary Creep of Die-Cast Magnesium-Rare Earth Based Alloys
Zhu, S. M.
Gibson, M. A.
Nie, J. F.
Easton, M. A.
Dunlop, G. L.
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (09): : 2036 - 2041
[6] HOT TEARING IN MAGNESIUM-RARE EARTH ALLOYS
Easton, Mark
Gavras, Serge
Gibson, Mark
Zhu, Suming
Nie, Jian-Feng
Abbott, Trevor
[J]. MAGNESIUM TECHNOLOGY 2016, 2016, : 123 - 128
[7] On the corrosion of binary magnesium-rare earth alloys
Birbilis, N.
Easton, M. A.
Sudholz, A. D.
Zhu, S. M.
Gibson, M. A.
[J]. CORROSION SCIENCE, 2009, 51 (03) : 683 - 689
[8] BASIC METALLURGY OF THE MAGNESIUM DIE-CASTING ALLOYS
KAPLAN, HI
[J]. DIE CASTING ENGINEER, 1986, 30 (06): : 44 - 49
[9] Twin recrystallization mechanisms in magnesium-rare earth alloys
Basu, I.
Al-Samman, T.
[J]. ACTA MATERIALIA, 2015, 96 : 111 - 132
[10] Degradation behaviour of magnesium-rare earth biomedical alloys
Trivedi, P.
Nune, K. C.
Misra, R. D. K.
[J]. MATERIALS TECHNOLOGY, 2016, 31 (12) : 726 - 731

← 1 2 3 4 5 →