Metal-Plastic-Composites with an elastic intermediate Layer-Production by means of Press-Injection Molding Process or Sandwich-Injection Molding

被引：0

作者：

Braeuer, Matthias ^{[1
]}

Lehmann, Dieter ^{[1
]}

Loennecke, Katharina ^{[1
]}

Reichert, Volker ^{[1
]}

Schneider, Konrad ^{[1
]}

机构：

[1] Leibniz Inst Polymerforsch Dresden eV, PF 120411, D-01005 Dresden, Germany

来源：

KGK-KAUTSCHUK GUMMI KUNSTSTOFFE | 2020年 / 73卷 / 1-2期

关键词：

Metal-TPU composite; Elastic interface layer; Injection moulding; Sandwich injection moulding; Bond strength; Shear test; Apparent shear strength; STRENGTH;

D O I：

暂无

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Metal-plastic composites are promising components for lightweight constructions. The paper deals with metal-plastic composites with an elastic interface layer of polyurethane with different thicknesses. The introduction of such a plane and adhesively bonded elastic interface layer enables the production composites of metals and thermoplastics with very high bond strength. The composites are made by compression moulding, injection moulding or by sandwich injection moulding. The bond strength was characterized by a shear test.

引用

页码：24 / 30

页数：7

共 12 条

[1] Metal-Plastic-Composites with an elastic intermediate Layer - Production by means of Press-Injection Molding Process or Sandwich-Injection Molding
Lehmann, Dieter
Lönnecke, Katharina
Reichert, Volker
Schneider, Konrad
Bräuer, Matthias
KGK Kautschuk Gummi Kunststoffe, 2020, 72 (1-2): : 24 - 30
[2] Innovative Use of Wood-Plastic-Composites (WPC) as a Core Material in the Sandwich Injection Molding Process
Moritzer, Elmar
Martin, Yannick
PROCEEDINGS OF PPS-31: THE 31ST INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY, 2016, 1713
[3] Effects of process parameters in plastic, metal, and ceramic injection molding processes
Lee, Shi W.
Ahn, Seokyoung
Whang, Chul Jin
Park, Seong Jin
Atre, Sundar V.
Kim, Jookwon
German, Randall M.
KOREA-AUSTRALIA RHEOLOGY JOURNAL, 2011, 23 (03) : 127 - 138
[4] Effects of process parameters in plastic, metal, and ceramic injection molding processes
Shi W. Lee
Seokyoung Ahn
Chul Jin Whang
Seong Jin Park
Sundar V. Atre
Jookwon Kim
Randall M. German
Korea-Australia Rheology Journal, 2011, 23 : 127 - 138
[5] Application of porous oxide layer in plastic/metal direct adhesion by injection molding
Yeh, Ren-Yu
Hsu, Ray-Quen
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2015, 29 (15) : 1617 - 1627
[6] Metal-plated plastic waveguide filter using injection molding process
Asao, H
Yoneda, N
Mukuda, M
Yamasaki, K
Kamohara, O
Yoshino, Y
Henmi, K
2003 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM DIGEST, VOLS 1-3, 2003, : 941 - 944
[7] A Hybrid Architectural Model for Monitoring Production Performance in the Plastic Injection Molding Process
Luisi, Gerardo
Di Pasquale, Valentina
Pietronudo, Maria Cristina
Riemma, Stefano
Ferretti, Marco
Gola, Arkadiusz
Forestiero, Agostino
APPLIED SCIENCES-BASEL, 2023, 13 (22):
[8] Plastic Injection Molding Process Analysis: Data Integration and Modeling for Improved Production Efficiency
Hernandez-Vega, Jose Isidro
Reynoso-Guajardo, Luis Alejandro
Gallardo-Morales, Mario Carlos
Macias-Arias, Maria Ernestina
Hernandez, Amadeo
de la Cruz, Nain
Soto-Soto, Jesus E.
Hernandez-Santos, Carlos
APPLIED SCIENCES-BASEL, 2024, 14 (22):
[9] Wood-Plastic Composites: Rheological Characterization and Filling Behavior during Injection Molding Process
Kirchhoff, Nadine
Schroeder, Cathrin
Stute, Daniel
Moritzer, Elmar
Schmid, Hans-Joachim
CHEMIE INGENIEUR TECHNIK, 2012, 84 (09) : 1584 - 1589
[10] Performance Measurement of SMED Improved Plastic Injection Molding Production by Using Process Capability Analysis for Attribute Data
Cakmakci, Mehmet
Demirel-Ortabas, Neslihan
ADVANCES IN MANUFACTURING II, VOL 2 - PRODUCTION ENGINEERING AND MANAGEMENT, 2019, : 188 - 205

← 1 2 →