Application of the machine CNC system in the laser marking

被引：0
|
作者：
Zhao, Wei [1 ]
Sa, Yu [2 ]
Liu, Xuebin [1 ]
Feng, Na [1 ]
机构：
[1] Tianjin Univ Technol & Educ, Dept Engn Mech, Tianjin 300222, Peoples R China
[2] Tianjin Univ, Coll Precis Instrument & Optoelect Engn, Key Lab Optoelect Informat & Tech Sci, Minist Educ, Tianjin 300072, Peoples R China
来源：
LASERS IN MATERIAL PROCESSING AND MANUFACTURING III | 2008年 / 6825卷
关键词：
laser marking; CNC system; open-architecture; two-valued graph; scan mode; path mode; galvanometer; controller; G-code; code translating;
D O I：
10.1117/12.753925
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Laser marking is non-contact, non-pollution and permanence so it will be used widely. Laser marking is related essentially with the CNC machining. It is proposed that the control method and algorithm in the CNC system can be applied to the laser marking. The comparability of them is summarized on the base of analyzing the composition characters of the open-architectured CNC system and the laser marking. The mode of Laser marking includes scan mode and path one which are researched in detail in this paper. For path mode, the steps and code translation of CNC machining are applied. This method is not only useful to settle the edge effect, but also improve the marking efficiency.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Application of Open CNC System in NC Machine Reform
    Huang, Yong-Hua
    Gao, Han
    PROCEEDINGS OF THE 2017 5TH INTERNATIONAL CONFERENCE ON MECHATRONICS, MATERIALS, CHEMISTRY AND COMPUTER ENGINEERING (ICMMCCE 2017), 2017, 141 : 244 - 248
  • [2] Design of an Adaptive System for Stabilization of a Laser Beam for CNC Machine
    Fedosov, Yuri V.
    Afanasev, Maxim Ya.
    PROCEEDINGS OF THE 19TH CONFERENCE OF OPEN INNOVATIONS ASSOCIATION (FRUCT), 2016, : 31 - 36
  • [3] Retrofitment of Laser Cladding System with CNC Machine for Hybrid Layer Manufacturing
    Negi, Seema
    Kapil, Sajan
    Sharma, Arun
    Choudhary, Priyanka
    Bhargava, Parag
    Karunakaran, K. P.
    ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, : 47 - 59
  • [4] The vector spot compensation applied in CNC system for laser cutting machine
    Xie, Q
    Li, SM
    Xu, Z
    Wu, HQ
    Yin, Q
    1999 INTERNATIONAL CONFERENCE ON INDUSTRIAL LASERS (IL'99), 1999, 3862 : 337 - 341
  • [5] SOPC control system for two dimensional laser CNC cutting machine
    Wang, Haifeng
    Cheng, Guanghe
    Wang, Maoli
    Wang, Shangbin
    2011 INTERNATIONAL CONFERENCE ON FUTURE COMPUTER SCIENCE AND APPLICATION (FCSA 2011), VOL 2, 2011, : 270 - 273
  • [6] Foamy CNC Laser Cutting Machine
    Leon, Paola
    Aguilar, Darwin
    Maldonado, Freddy
    Vargas, Nestor
    Fernandez, Cristian
    2016 IEEE INTERNATIONAL CONFERENCE ON AUTOMATICA (ICA-ACCA), 2016,
  • [7] Laser marking looks to machine vision
    Knight, A
    LASER FOCUS WORLD, 1996, 32 (07): : 117 - &
  • [8] Development and application of open CNC system for micro-EDM machine
    Li, Qiang
    Zhu, Guozheng
    Bai, Jicheng
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2015, 36 (09): : 1234 - 1239
  • [9] The Vibration Detection System of CNC Machine Tools and the Application of Spindle Test
    Wu, Y. H.
    Rao, L. W.
    Zhao, D. H.
    Zhang, K.
    ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XVI, 2011, 487 : 473 - +
  • [10] CNC laser marking on freeform surfaces without prior geometrical information
    Gong, ZM
    Huang, S
    Zeng, H
    Chen, XQ
    2002 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS, VOLS 1-3, PROCEEDINGS, 2002, : 1862 - 1867
12345