LASER WELDING OF Zr55Cu30Al10Ni5 BULK METALLIC GLASS

被引：0
|
作者：
Ashour, M. [1 ]
Katayama, S. [1 ]
Kuroda, T. [1 ]
Kimura, H. [2 ]
机构：
[1] Osaka Univ, JWRI, Osaka, Japan
[2] Tohoku Univ, IMR, Sendai, Miyagi, Japan
来源：
CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS III | 2010年 / 219卷
关键词：
SUPERCOOLED LIQUID; ALLOYS; PHASE;
D O I：
暂无
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Disk and diode laser sources were used for bead-on-plate welding of Zr55Cu30Al10Ni5 bulk metallic glass. It was found that the disk laser could produce an amorphous metal weld without crystallization in the heat affected zone using a laser power of 3 kW and a scanning speed of 72 m/min. Meanwhile, using the same laser power, an amorphous metal weld could be produced with the diode laser using a scanning speed of 20 m/min. However, crystallization in the heat affected zone could not be fully suppressed, even with a higher scanning speed.
引用
收藏
页码：73 / +
页数：3
相关论文
共 50 条
  • [1] Crystallization of Zr55Cu30Al10Ni5 Bulk Metallic Glass in Laser Welding: Simulation and Experiment
    Chen, Biao
    Shi, Tielin
    Li, Mo
    Wen, Chi
    Liao, Guanglan
    [J]. ADVANCED ENGINEERING MATERIALS, 2015, 17 (04) : 483 - 490
  • [2] NMR investigations of the bulk metallic glass Zr55Cu30Al10Ni5
    Hoffmann, W
    Baenitz, M
    Lüders, K
    Gebert, A
    Eckert, J
    Schultz, L
    [J]. BULK METALLIC GLASSES, 1999, 554 : 95 - 100
  • [3] Viscosity of Zr55Cu30Al10Ni5 bulk metallic glass measured by laser viscometer
    Liu, B. B.
    Liu, B. Y.
    Fang, X. S.
    Zhang, L. Q.
    Ye, F.
    Chen, G. L.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 : S208 - S210
  • [4] Pressure effect on crystallization of Zr55CU30Al10Ni5 bulk metallic glass
    Liu, JJ
    Qiu, KQ
    Wang, AM
    Zhang, HF
    Ding, BZ
    Hu, ZQ
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2002, 18 (02) : 184 - 186
  • [5] Pressure Effect on Crystallization of Zr55Cu30Al10Ni5 Bulk Metallic Glass
    Jianjun LIU
    [J]. Journal of Materials Science & Technology, 2002, (02) : 184 - 186
  • [6] Laser welding of annealed Zr55Cu30Ni5Al10 bulk metallic glass
    Chen, B.
    Shi, T. L.
    Li, M.
    Yang, F.
    Yan, F.
    Liao, G. L.
    [J]. INTERMETALLICS, 2014, 46 : 111 - 117
  • [7] Isothermal Extrusion Properties of Zr55Cu30Al10Ni5 Bulk Metallic Glass
    Ma Zhihui
    Dong Xianghuai
    Su Hongjuan
    Wang Ruyan
    [J]. RARE METAL MATERIALS AND ENGINEERING, 2012, 41 (10) : 1706 - 1708
  • [8] Micro indentation size effect of a Zr55Cu30Al10Ni5 bulk metallic glass
    Department of Mechanics, Tianjin University, Tianjin
    300072, China
    不详
    300134, China
    [J]. Beijing Ligong Daxue Xuebao, (29-32):
  • [9] Toughness of Zr55Cu30Al10Ni5 bulk metallic glass for two oxygen levels
    Keryvin, V.
    Bernard, C.
    Sangleboeuf, J. -C.
    Yokoyama, Y.
    Rouxel, T.
    [J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2006, 352 (26-27) : 2863 - 2868
  • [10] Friction stir welding of Zr55Cu30Al10Ni5 bulk metallic glass to Al-Zn-Mg-Cu alloy
    Wang, D.
    Xiao, B. L.
    Ma, Z. Y.
    Zhang, H. F.
    [J]. SCRIPTA MATERIALIA, 2009, 60 (02) : 112 - 115
12345