VIRTUAL PROTOTYPING OF A SPRAYING ROBOTIC SYSTEM

被引：1
|
作者：
Enescu, Monica [1 ]
Alexandru, Catalin [1 ]
机构：
[1] Transilvania Univ Brasov, Renewable Energy Syst & Recycling Ctr, 29 Eroilor Bvd, Brasov 500036, Romania
来源：
ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL | 2011年 / 10卷 / 08期
关键词：
control loop; multi-body system; robotic system; spray pyrolysis; virtual prototype; SIMULATION;
D O I：
10.30638/eemj.2011.172
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
The paper presents the virtual prototype of a robotic system for spray pyrolysis deposition (SPD). To design of the mechanical device model of the robotic system, the MBS environment ADAMS of MSC Software was used, while the MATLAB/Simulink of Mathworks was used for the dynamic analysis of the robotic system, according to the mechatronic concept. A control loop was chosen, composed by a multi-body mechanical model, connected to the dynamic model of each motor. The main objective is to verify the correlation between the control system (of the DC motors) and the imposed trajectories (of the end-effector).
引用
收藏
页码：1197 / 1205
页数：9
相关论文
共 50 条
  • [1] A Simulation Framework for Virtual Prototyping of Robotic Exoskeletons
    Agarwal, Priyanshu
    Neptune, Richard R.
    Deshpande, Ashish D.
    [J]. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (06):
  • [2] VIRTUAL PROTOTYPING A MODULAR ROBOTIC SYSTEM FOR MUSHROOM CONTROLLED CULTIVATION AND INTEGRATED PROCESSING
    Nicolescu, Adrian
    Enciu, George
    Dobrescu, Tiberiu
    Ivan, Mario
    Dobre, Marcel
    [J]. ANNALS OF DAAAM FOR 2009 & PROCEEDINGS OF THE 20TH INTERNATIONAL DAAAM SYMPOSIUM, 2009, 20 : 685 - 686
  • [3] Virtual Prototyping of a Compliant Spindle for Robotic Deburring
    Berselli, Giovanni
    Pellicciari, Marcello
    Bigi, Gabriele
    Andrisano, Angelo O.
    [J]. PROCEEDINGS OF SECOND INTERNATIONAL CONFERENCE ON ELECTRICAL SYSTEMS, TECHNOLOGY AND INFORMATION 2015 (ICESTI 2015), 2016, 365 : 17 - 30
  • [4] A robotic system for rapid prototyping
    Tse, WC
    Chen, YH
    [J]. 1997 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION - PROCEEDINGS, VOLS 1-4, 1997, : 1815 - 1820
  • [5] Virtual Prototyping and Commissioning of Manufacturing Cycles in Robotic Cells
    Raffaeli, Roberto
    Bilancia, Pietro
    Peruzzini, Margherita
    Pisu, Simona
    Berselli, Giovanni
    Pellicciari, Marcello
    [J]. DESIGN TOOLS AND METHODS IN INDUSTRIAL ENGINEERING III, VOL 2, ADM 2023, 2024, : 391 - 398
  • [6] Multibody System for Virtual Prototyping
    Chang, Kevin
    Johnson, Christopher
    [J]. PROCEEDINGS OF ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 4, PTS A-C, 2010, : 1499 - 1507
  • [7] Geometric Feedback System for Robotic Spraying
    Frangez, Valens
    Taha, Nizar
    Feihl, Nicolas
    Lloret-Fritschi, Ena
    Gramazio, Fabio
    Kohler, Matthias
    Wieser, Andreas
    [J]. PFG-JOURNAL OF PHOTOGRAMMETRY REMOTE SENSING AND GEOINFORMATION SCIENCE, 2022, 90 (06): : 531 - 542
  • [8] Geometric Feedback System for Robotic Spraying
    Valens Frangez
    Nizar Taha
    Nicolas Feihl
    Ena Lloret-Fritschi
    Fabio Gramazio
    Matthias Kohler
    Andreas Wieser
    [J]. PFG – Journal of Photogrammetry, Remote Sensing and Geoinformation Science, 2022, 90 : 531 - 542
  • [9] System development of adaptive spraying paths for rapid prototyping
    Liang, JS
    Lin, AC
    [J]. RAPID PROTOTYPING JOURNAL, 2003, 9 (05) : 289 - 300
  • [10] Virtual prototyping of force-feedback robotic instruments for surgery
    Gomez-de-Gabriel, J. M.
    Munoz, V. F.
    Harwin, W. S.
    Barrow, A.
    [J]. INNOVATIVE DEVELOPMENTS ON VIRTUAL AND PHYSICAL PROTOTYPING, 2012, : 677 - 684
12345