Development of Cost Effective Out-of-Autoclave Technology - Vacuum Infusion Process with Tailored Fibre Volume Fraction

被引：0

作者：

Sunilpete, M. A. ^{[1
]}

Cadambi, Rahul M. ^{[1
]}

机构：

[1] Ramaiah Univ Appl Sci, 470-P, Bangalore 560058, Karnataka, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2020年 / 21卷

关键词：

Fiber Volume Fraction; Void content; Out-of-Autoclave; Vacuum Infusion Process; INTERLAMINAR FRACTURE-TOUGHNESS;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Vacuum infusion process is one of the Out-of-Autoclave (OoA) technologies which is emerging as one of the potential alternative for autoclave process in manufacturing structural components. Presently, vacuum infusion process (BMVIP) has a drawback of low Fiber Volume Fraction (FVF) and has more voids content. In this research work, BMVIP is modified by adding a double bag (DBVIP), by creating a resin trap (RTVIP) and by using a silicone bag (SBVIP). Laminates prepared from vacuum infusion processes is subjected to estimation of FVF and void content, mechanical tests and DMA studies. Modifications in vacuum infusion processes increased the FVF to 58.3%, reduced void content to 1.29% and increased tensile, flexural and ILSS properties by 25%, 12% and 12% respectively. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：1293 / 1297

页数：5

共 10 条

[1] New prepregs for cost effective, out-of-autoclave tool and component manufacture
Steele, M
Corden, T
SAMPE JOURNAL, 2004, 40 (02) : 30 - 34
[2] Development and performance analysis of out-of-autoclave curing process for CFRP composites
Joshi, S. J.
Patel, Kautilya S.
Shah, D. B.
Patel, K. M.
Mawandiya, B. K.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 : 1593 - 1603
[3] Enhancing oxidation resistance of carbon fibre reinforced phenolic composites by ZrO2 nanoparticles through out-of-autoclave vacuum infusion
Sha, Zhao
Yang, Wenmu
Wang, Cheng
Islam, Mohammad S.
Yeoh, Guan Heng
Officer, David L.
Canning, Warren
Zhang, Jin
Wang, Chun H.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2024, 180
[4] Out-of-autoclave cure cycle study of a resin film infusion process using in situ process monitoring
Garschke, C.
Weimer, C.
Parlevliet, P. P.
Fox, B. L.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (06) : 935 - 944
[5] Evaluation of a concept out-of-autoclave process for manufacturing carbon fibre reinforced polymer automotive parts
Taylor, T.
Zhang, J.
Yanagimoto, J.
7TH CIRP GLOBAL WEB CONFERENCE - TOWARDS SHIFTED PRODUCTION VALUE STREAM PATTERNS THROUGH INFERENCE OF DATA, MODELS, AND TECHNOLOGY (CIRPE 2019), 2019, 86 : 162 - 166
[6] Out-of-autoclave scarf repair of interlayer toughened carbon fibre composites using double vacuum debulking of patch
Chong, H. M.
Liu, S. L.
Subramanian, A. S.
Ng, S. P.
Tay, S. W.
Wang, S. Q.
Feih, S.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2018, 107 : 224 - 234
[7] Hydrothermal in-plane-shear strength of carbon fibre/benzoxazine laminates manufactured out-of-autoclave by liquid-resin-infusion
Comer, A. J.
Ray, D.
Clancy, G.
Obande, W. O.
Rosca, I
McGrail, P. T.
Stanley, W. F.
COMPOSITE STRUCTURES, 2019, 213 : 261 - 270
[8] Development of Vacuum Enhanced Resin Infusion Technology (VERITy) Process for Manufacturing of Primary Aircraft Structures
Verma, Kundan Kumar
Dinesh, B. L.
Singh, Kailash
Gaddikeri, Kotresh M.
Srinivasa, V.
Kumar, Ramesh
Sundaram, Ramesh
JOURNAL OF THE INDIAN INSTITUTE OF SCIENCE, 2013, 93 (04) : 621 - 633
[9] Development and Validation of a Fully GMP-Compliant Process for Manufacturing Stromal Vascular Fraction: A Cost-Effective Alternative to Automated Methods
Francois, Pauline
Giraudo, Laurent
Veran, Julie
Bertrand, Baptiste
Dumoulin, Chloe
Aboudou, Houssein
Grimaud, Fanny
Vogtensperger, Marie
Velier, Melanie
Arnaud, Laurent
Lyonnet, Luc
Simoncini, Stephanie
Guillet, Benjamin
Dignat-George, Francoise
Magalon, Jeremy
Sabatier, Florence
CELLS, 2020, 9 (10)
[10] Co-optimizing Process Development, Layout and Circuit Design for Cost-Effective 22nm Technology Platform
Michaels, Kimon
2009 IEEE INTERNATIONAL ELECTRON DEVICES MEETING, 2009, : 419 - 419

← 1 →