Microstructural and chemical characterization of Al3Ti alloy obtained with a rapid solidification technique

被引：7
|
作者：
Angeles, C
Rosas, G
Perez, R
机构：
[1] Univ Nacl Autonoma Mexico, Inst Fis, Lab Cuernavaca, Cuernavaca 62251, Morelos, Mexico
[2] Univ Michoacana, Inst Invest Met, Morelia 58000, Michoacan, Mexico
[3] Inst Nacl Invest Nucl, Dept Sintesis & Caracterizat Mat, Salazar 52045, DF, Mexico
来源：
MATERIALS CHEMISTRY AND PHYSICS | 1998年 / 56卷 / 03期
关键词：
alloys; microstructure; solidification;
D O I：
10.1016/S0254-0584(98)00190-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Different alloys of Ti-Al have been prepared using an are furnace under inert atmosphere. The liquid melt has been cast with a rapid solidification technique. The main purpose of this investigation is to explore the intermetallic phases obtained under this casting process and also the structural relationships between all the phases obtained in these types of alloys. The structural characterization of the specimens has been carried out using X-ray diffraction techniques. Chemical and morphological characteristics have been obtained using an analytical scanning electron microscope. Finally, some structural characteristics of the alloys have been obtained using an analytical transmission electron microscope. (C) 1998 Elsevier Science S,A. All rights reserved.
引用
收藏
页码：262 / 265
页数：4
相关论文
共 50 条
  • [1] Microstructural and chemical characterizations of Al3Ti obtained with rapid solidification techniques
    Angeles, C
    Rosas, G
    Perez, R
    ELECTRON MICROSCOPY 1998, VOL 2: MATERIALS SCIENCE 1, 1998, : 89 - 90
  • [2] Microstructural characterization and tribocorrosion behaviour of Al/Al3Ti and Al/Al3Zr FGMs
    Ferreira, S. C.
    Sequeira, P. D.
    Watanabe, Yoshimi
    Ariza, E.
    Rocha, L. A.
    WEAR, 2011, 270 (11-12) : 806 - 814
  • [3] Preparation of Al3Ti and L12 Al3Ti-base alloys microalloyed with Fe by a melting/casting rapid-solidification technique
    Angeles, C
    Rosas, G
    Perez, R
    MATERIALS AND MANUFACTURING PROCESSES, 2000, 15 (02) : 207 - 219
  • [4] Characterization of the Al3Ti phase in Al-Ti alloys
    Boulkhessaim, Salim
    Souilah, Yamina
    Bedboudi, Hayette
    Bourbia, Amel
    Draissia, Mohamed
    EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS, 2013, 62 (01):
  • [5] SINGULARITIES OF AL3TI GROWTH IN CHEMICAL DIFFUSION COUPLE AL/TI
    POULIQUE.JM
    OFFRET, S
    NGUYEN, MH
    JOURNAL DE MICROSCOPIE, 1972, 14 (02): : A10 - +
  • [6] Mechanical behaviour and structure instability of Al3Ti alloy
    Morris, D.G.
    Journal of Materials Science and Technology, 1994, 10 (01): : 1 - 14
  • [7] Mechanical Behaviour and Structure Instability of Al3Ti Alloy
    D.G.Morris(Institute of Structural Metallurgy
    JournalofMaterialsScience&Technology, 1994, (01) : 1 - 14
  • [8] Effect of strain-induced precipitation of Al3Ti on the mechanical behavior of Al3Ti(+9.7Fe) alloy
    Beijing Keji Daxue Xuebao, 6 (528-531):
  • [9] Microstructure Characterization of Rapid Solidification Al Alloy Foil
    Li, Yan
    Zhai, Chuanxin
    Xu, Chunhua
    FRONTIER OF NANOSCIENCE AND TECHNOLOGY, 2011, 694 : 847 - +
  • [10] Microstructure and thermal stability of mechanically alloyed Al3Ti/Al alloy
    林建国
    魏浩岩
    黄正
    Transactions of Nonferrous Metals Society of China, 2001, (02) : 266 - 269
12345