Novel Elastic Fiber (SUSTANS®) With Different Spinning Parameters

被引：0
|
作者：
Cai, Tao [1 ,2 ,3 ]
Feng, Yong-Sheng [2 ]
Zheng, Xi [2 ]
Liu, Hong-Yan [2 ]
Zheng, Zha-Xian [2 ]
Ouyang, Wen-Xian [2 ]
机构：
[1] Quanzhou Normal Univ, Quanzhou 362000, Fujian, Peoples R China
[2] Haixing Mat Technol Co Ltd, Shishi 362700, Fujian, Peoples R China
[3] Hosa Int Ltd, Jinjiang 362000, Fujian, Peoples R China
来源：
TEXTILE BIOENGINEERING AND INFORMATICS SYMPOSIUM PROCEEDINGS, 2017, VOL. 3 | 2017年
关键词：
Elastic Fiber; Spinning; Parameter;
D O I：
暂无
中图分类号：
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号：
0805 ; 080502 ; 0821 ;
摘要：
A novel elastic fiber (SUSTANS((R))) was prepared with different spinning parameters. The different viscosity, draw ratio and temperature of drawing roll were changed during the experimental process of the elastic fiber. The effect of these parameters on breaking strength, original modules, breaking elongation and roll elastic were studied. It showed that with the decrease viscosity difference of the elastic fiber, the roll and elastic properties of the composite fiber were increased and the breaking strength was decreased. In addition, with the increase of draw ratio and roll temperature, the breaking strength and elasticity were increased and the breaking elongation was decreased.
引用
收藏
页码：1185 / 1188
页数：4
相关论文
共 50 条
  • [1] INFLUENCE OF DIFFERENT FIBER PARAMETERS ON THE PROCESSING BEHAVIOR IN THE SPINNING FACTORY
    FEIL, R
    [J]. MELLIAND TEXTILBERICHTE INTERNATIONAL TEXTILE REPORTS, 1984, 65 (04): : 281 - 281
  • [2] FIBER SPINNING OF A WEAKLY ELASTIC LIQUID
    SRIDHAR, T
    GUPTA, RK
    [J]. JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 1988, 27 (03) : 349 - 362
  • [3] The Effect of Different Process Parameters on Polyamide 66 Nano Fiber by Force Spinning Method
    Bazrafshan, Vahid
    Saeidi, Ardeshir
    Mousavi, Afshin
    [J]. PROCEEDINGS OF THE 35TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-35), 2020, 2205
  • [4] Study of fiber configuration at different stages of spinning
    Vishwakarma, Sandeep
    Thakur, Bharti
    [J]. Asian Textile Journal, 2021, 30 (03): : 30 - 36
  • [5] Screening Cellulose Spinning Parameters for Fabrication of Novel Carbon Hollow Fiber Membranes for Gas Separation
    Lei, Linfeng
    Lindbrathen, Arne
    Hillestad, Magne
    Sandru, Marius
    Favvas, Evangelos P.
    He, Xuezhong
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2019, 58 (29) : 13330 - 13339
  • [6] A novel mechanical metamaterial with dramatically different elastic parameters in tension and compression
    Wu, Hao
    Zhong, Rongchang
    Chen, Wei
    Fu, Minghui
    [J]. MATERIALS TODAY COMMUNICATIONS, 2023, 34
  • [7] ELASTIC STRESSES GENERATED DURING FIBER FORMATION BY WET-SPINNING
    PAUL, DR
    ARMSTRON.AA
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1973, 17 (04) : 1269 - 1282
  • [8] Effect of box parameters on fiber orientation in box-spinning
    Bengar, R. A.
    Eskandarnejad, S.
    Moghadam, M. B.
    [J]. JOURNAL OF THE TEXTILE INSTITUTE, 2014, 105 (10) : 1089 - 1099
  • [9] Effects of melt spinning parameters on polypropylene hollow fiber formation
    Ruckdashel, Rebecca
    Shim, Eunkyoung
    [J]. JOURNAL OF ENGINEERED FIBERS AND FABRICS, 2020, 15
  • [10] Numerical simulation of the fiber trajectories in vortex spinning under different process parameters based on the finite element model
    Han, Chenchen
    Cheng, Longdi
    Gao, Weidong
    Hua, Zhihong
    Xue, Wenliang
    [J]. TEXTILE RESEARCH JOURNAL, 2019, 89 (13) : 2626 - 2636
12345