An Integrated Approach for Mapping Three-Dimensional CoSeismic Displacement Fields from Sentinel-1 TOPS Data Based on DInSAR, POT, MAI and BOI Techniques: Application to the 2021 Mw 7.4 Maduo Earthquake

Sentinel-1 Terrain Observation by Progressive Scans (TOPS) data have been widely applied in earthquake studies due to their open-source policy, short revisit cycle and wide coverage. However, significant near-fault displacement gradients and the moderate azimuth resolution of TOPS data make achieving high-precision along-track measurements challenging, which prevents the generation of high-quality three-dimensional (3D) displacement maps. Here, we propose an integrated method to retrieve high-quality 3D displacements based on the differential interferometric SAR (DInSAR), burst-overlap interferometry (BOI), multiple-aperture InSAR (MAI) and pixel offset tracking (POT) techniques, which are achieved to use only two track Sentinel-1 TOPS data with different viewing geometries. The key step of this method is using a weighted fusion algorithm with the interpolated BOI-derived and MAI-derived 3D displacements. In a case study of the 2021 Maduo earthquake, the calculated root mean square errors (RMSEs) from global navigation satellite system (GNSS) data and the InSAR-derived 3D displacement fields were found to be 6.3, 5.8 and 1.7 cm in north-south, east-west and up-down components, respectively. Moreover, the slip model of the 2021 Maduo earthquake jointly estimated by DInSAR and BOI measurements indicates that this seismic event was dominated by sinistral strike-slip motion mixed with some dip-slip movements; the estimated seismic moment was 1.75 x 10(20) Nm, corresponding to a Mw 7.44 event.