Optimization of cutting parameters for maximizing tool life

被引：53
|
作者：
Choudhury, SK [1 ]
Rao, IVKA [1 ]
机构：
[1] Indian Inst Technol, Dept Mech Engn, Kanpur 208016, Uttar Pradesh, India
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1999年 / 39卷 / 02期
关键词：
tool life; optimization;
D O I：
10.1016/S0890-6955(98)00028-5
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Optimum use of the cutting tool is a growing need in modem industries since the cost of production is directly affected by this. This paper presents a new approach for improving the cutting tool life by using optimal values of velocity and feed throughout the cutting process. A tool life equation has been established from experimental data and the adhesion wear model. Optimization techniques have been used to maximize the tool life subject to practical constraints while maintaining a constant metal removal rate. The experimental results showed an improvement in tool life by 30%. (C) 1998 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：343 / 353
页数：11
相关论文
共 50 条
  • [1] Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites
    Bhushan, Rajesh Kumar
    [J]. JOURNAL OF CLEANER PRODUCTION, 2013, 39 : 242 - 254
  • [2] OPTIMIZATION OF CUTTING-TOOL PARAMETERS
    KATSEV, PG
    [J]. INDUSTRIAL LABORATORY, 1970, 36 (05): : 744 - &
  • [3] Effects of machining parameters on tool life and its optimization in turning mild steel with brazed carbide cutting tool
    Dasgupta, S.
    Mukherjee, S.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND MANUFACTURING APPLICATIONS (ICONAMMA-2016), 2016, 149
  • [4] Optimization of tool geometry and cutting parameters for hard turning
    Singh, Dilbag
    Rao, P. Venkateswara
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2007, 22 (01) : 15 - 21
  • [5] Accounting casual character of the cutting tool life at the optimization of the cutting regimes
    Mikhailov, A.
    Ivchenko, T.
    Petryaeva, I.
    [J]. INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY (IMANEE 2019) - 50 YEARS OF HIGHER TECHNICAL EDUCATION AT THE UNIVERSITY OF PITESTI, 2019, 564
  • [6] Optimization of tool geometry and cutting parameters based on a predictive model of cutting force
    Zhao Jun Shandong University, Jinan 250061, China
    [J]. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2008, 19 (04): : 428 - 431
  • [7] Effect of Cutting Parameters on Diamond Tool Life during Cutting Stainless Steel
    Zhou, Z. M.
    Zhang, Y. L.
    Dong, J.
    Li, X. Y.
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL 1: ADVANCED MANUFACTURING TECHNOLOGY AND EQUIPMENT, AND MANUFACTURING SYSTEMS AND AUTOMATION, 2009, 626-627 : 99 - +
  • [8] Genetic Algorithm as a Tool of Fuzzy Parameters and Cutting Forces Optimization
    Gallova, Stefania
    [J]. WORLD CONGRESS ON ENGINEERING 2009, VOLS I AND II, 2009, : 266 - 272
  • [9] Optimization of cutting tool geometry and machining parameters in turning process
    Saravanamurugan, S.
    Sundar, B. Shyam
    Pranav, R. Sibi
    Shanmugasundaram, A.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 3351 - 3357
  • [10] MODELING AND OPTIMIZATION OF THE CUTTING FLUID FLOW AND PARAMETERS FOR INCREASING TOOL LIFE IN SLOT MILLING ON St52
    Khorasani, Amir Mahyar
    Kootsookos, Alex
    [J]. INTERNATIONAL JOURNAL OF MODELING SIMULATION AND SCIENTIFIC COMPUTING, 2013, 4 (02)
12345