Recycling of waste attapulgite to prepare ceramic membranes for efficient oil-in-water emulsion separation

Large-scale application of ceramic membranes is restricted by high cost resulting from raw materials and sintering process. In this study, low-cost ceramic membranes were prepared with waste attapulgite (WAT) and alpha-Al2O3 as starting materials and used for oily wastewater treatment. The optimal membrane sintered at 1100 degrees C possessed excellent properties, with open porosity of 41.6%, flexural strength of 37.2 MPa and average pore size of 0.40 mu m. The membrane also displayed outstanding permeability and chemical stability. The hydrophilicity and underwater oleophobicity were enhanced after surface modification. When used for oil-in-water emulsion filtration, the permeate flux reached 236.8 L m(-2) h(-2) bar(-1) under a low transmembrane pressure of 0.2 bar and the oil rejection exceeded 99%. Membrane cleaning with a simple ultrasonic treatment could easily achieve flux recovery. This study proposed a feasible strategy for both solid waste utilization and oily wastewater treatment.