Process window enhancement for single point incremental forming through multi-step toolpaths

被引：174
|
作者：
Duflou, J. R. [1 ]
Verbert, J. [1 ]
Belkassem, B. [2 ]
Gu, J. [2 ]
Sol, H. [2 ]
Henrard, C. [3 ]
Habraken, A. M. [3 ]
机构：
[1] Katholieke Univ Leuven, Dept Mech Engn, Louvain, Belgium
[2] Vrije Univ Brussel, Dept Mech Mat & Construct, Brussels, Belgium
[3] Univ Liege, Dept ArGEnCo, B-4000 Liege, Belgium
来源：
CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2008年 / 57卷 / 01期
关键词：
incremental forming; simulation; multi-step toolpath;
D O I：
10.1016/j.cirp.2008.03.030
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Single point incremental forming (SPIF) suffers from process window limitations which are strongly determined by the maximum achievable forming angle. Forming consecutive, intermediate shapes can contribute to a significantly enlarged process window by allowing steeper maximum wall angles for a range of part geometries. In this paper an experimentally explored multi-step toolpath strategy is reported and the resulting part geometries compared to simulation output. Sheet thicknesses and strains achieved with these multi-step toolpaths were verified and contribute to better understanding of the material relocation mechanism underlying the enlarged process window. (c) 2008 CIRP.
引用
收藏
页码：253 / 256
页数：4
相关论文
共 50 条
  • [1] Multi-step incremental forming using local feature based toolpaths
    Carette, Yannick
    Vanhove, Hans
    Duflou, Joost
    [J]. 18TH INTERNATIONAL CONFERENCE ON SHEET METAL, SHEMET 2019 - NEW TRENDS AND DEVELOPMENTS IN SHEET METAL PROCESSING, 2019, 29 : 28 - 35
  • [2] Multi-Step toolpath approach to overcome forming limitations in single point incremental forming
    Verbert, J.
    Belkassem, B.
    Henrard, C.
    Habraken, A. M.
    Gu, J.
    Sol, H.
    Lauwers, B.
    Duflou, J. R.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 1203 - 1206
  • [3] Multi-Step toolpath approach to overcome forming limitations in single point incremental forming
    J. Verbert
    B. Belkassem
    C. Henrard
    A. M. Habraken
    J. Gu
    H. Sol
    B. Lauwers
    J. R. Duflou
    [J]. International Journal of Material Forming, 2008, 1 : 1203 - 1206
  • [4] Process enhancement for single point incremental forming through a remeshing strategy
    [J]. 1600, Trans Tech Publications Ltd (682):
  • [5] A new methodology for multi-pass single point incremental forming with mixed toolpaths
    Malhotra, R.
    Bhattacharya, A.
    Kumar, A.
    Reddy, N. V.
    Cao, J.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (01) : 323 - 326
  • [6] A novel multi-step strategy of single point incremental forming for high wall angle shape
    Wu, Song
    Ma, Yunwu
    Gao, Leitao
    Zhao, Yixi
    Rashed, Sherif
    Ma, Ninshu
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2020, 56 : 697 - 706
  • [7] Numerical simulation on the process of sphere surface multi-step multi-point forming
    Qian, Zhi-Rui
    Li, Ming-Zhe
    Sun, Gang
    Tan, Fu-Xing
    Jin, Wen-Ji
    [J]. Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition), 2007, 37 (02): : 338 - 342
  • [8] Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques
    Amar Kumar Behera
    Bert Lauwers
    Joost R. Duflou
    [J]. International Journal of Material Forming, 2015, 8 : 517 - 532
  • [9] Tool path generation for single point incremental forming using intelligent sequencing and multi-step mesh morphing techniques
    Behera, Amar Kumar
    Lauwers, Bert
    Duflou, Joost R.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2015, 8 (04) : 517 - 532
  • [10] Tool path Generation for Single Point Incremental Forming using Intelligent Sequencing and Multi-step Mesh Morphing Techniques
    Behera, Amar Kumar
    Lauwers, Bert
    Duflou, Joost R.
    [J]. CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 1408 - 1418
12345