Heat Distribution in Disc Brake

被引：7

作者：

Klimenda, Frantisek ^{[1
]}

Soukup, Josef ^{[1
]}

Kampo, Jan ^{[1
]}

机构：

[1] Univ JE Purkyne Usti Nad Labem, Fac Prod Technol & Management, Dept Machines & Mech, Pasteurova 3334-7, Usti Nad Labem 40001, Czech Republic

来源：

APPLICATION OF EXPERIMENTAL AND NUMERICAL METHODS IN FLUID MECHANICS AND ENERGY 2016: XX ANNIVERSARY OF INTERNATIONAL SCIENTIFIC CONFERENCE | 2016年 / 1745卷

关键词：

D O I：

10.1063/1.4953715

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This article is deals by the thermal analysis of the disc brake with floating caliper. The issue is solved by numerically. The half 2D model is used for solution in program ADINA 8.8. Two brake discs without the ventilation are solved. One disc is made from cast iron and the second is made from stainless steel. Both materials are an isotropic. By acting the pressure force on the brake pads will be pressing the pads to the brake disc. Speed will be reduced (slowing down). On the contact surface generates the heat, which the disc and pads heats. In the next part of article is comparison the maximum temperature at the time of braking. The temperatures of both materials for brake disc (gray cast iron, stainless steel) are compares. The heat flux during braking for the both materials is shown.

引用

页数：6

共 50 条

[1] Effect of heat transfer optimization on brake noise characteristics of automotive disc brake
Zhang, Sen
Zhang, Jian
JOURNAL OF VIBROENGINEERING, 2019, 21 (03) : 792 - 802
[2] Effect of Brake Disc Design on Heat Transfer Dispersion
Haddar, Mohamed Ben Jamel
Ghorbel, Ahmed
Djemal, Fathi
Baccar, Mounir
Haddar, Mohamed
DESIGN AND MODELING OF MECHANICAL SYSTEMS-VI, VOL 1, CMSM 2023, 2024, : 228 - 235
[3] Computational investigation into disc-pads pressure distribution and thermomechanical coupling characteristics of brake pads in disc brake
Zhang, Lijun
Chen, Yuan
Diao, Kun
Meng, Dejian
Tongji Daxue Xuebao/Journal of Tongji University, 2013, 41 (10): : 1554 - 1561
[4] A nonlinear inverse problem in estimating the heat flux of the disc in a disc brake system
Yang, Yu-Ching
Chen, Wen-Lih
APPLIED THERMAL ENGINEERING, 2011, 31 (14-15) : 2439 - 2448
[5] REVIEW OF MODELLING OF TEMPERATURE DISTRIBUTION IN SOLID BRAKE DISC
Tomy, Jose M.
Micheal, Prawin Angel
Rony, K. R.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2023, 21 (02) : 595 - 609
[6] MATHEMATICAL MODELING OF DISC BRAKE FRICTION LINING HEAT AND WEAR
Feldmanis, Janis
7TH INTERNATIONAL SCIENTIFIC CONFERENCE - ENGINEERING FOR RURAL DEVELOPMENT, PROCEEDINGS, 2008, : 236 - 241
[7] Heat Dissipation from Stationary Passenger Car Brake Disc
Topouris, Stergios
Stamenkovic, Dragan
Olphe-Galliard, Michel
Popovic, Vladimir
Tirovic, Marko
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2020, 66 (01): : 15 - 28
[8] Numerical Analysis of Frictional Heat Generation in Bicycle Disc Brake
Tahmid, Shadman
Alam, Saima
7TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING (ICTE), 2017, 1851
[9] Investigation on the Heat Dissipation of Vane Structure on Ventilated Brake Disc
Kang, Ning
Hu, Li-Zhong
INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS ENGINEERING (ICMME 2014), 2014, : 257 - 262
[10] Research on the contact pressure distribution of the frictional pad of the disc brake
Gao Chenghui
Huang Jianmeng
Tang Xusheng
Lin Xiezhao
3rd China-Japan Conference on Mechatronics 2006 Fuzhou, 2006, : 257 - 261

← 1 2 3 4 5 →