Hydrogen embrittlement of steels for prestressing concrete: The FIP and DIBt tests

被引：24

作者：

Elices, M. ^{[1
]}

Caballero, L. ^{[1
]}

Valiente, A. ^{[1
]}

Ruiz, J. ^{[1
]}

Martin, A. ^{[1
]}

机构：

[1] Univ Politecn Madrid, ETSI Caminos, Dept Ciencia & Mat, Madrid 28040, Spain

来源：

CORROSION | 2008年 / 64卷 / 02期

关键词：

brittle fracture; cold-drawn wires; eutectoid; steel; hydrogen embrittlement; pearlitic steel; residual; stresses; stress corrosion cracking;

D O I：

10.5006/1.3280685

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Two tests, the International Federation of Prestressed Concrete (FIP) and the Deutsches; Institut fur Bautechnik (DIBt) tests, are currently used for ascertaining the hydrogen embrittlement susceptibility of steels for prestressing concrete. Both tests have advantages and drawbacks and further research is needed. With this goal, two types of eutectoid cold-drawn steel wires, one more susceptible to hydrogen embrittlement than the other, were tested according to FIP and DIBt recommendations. Based on the obtained experimental results and on the analysis of the mentioned references, some conclusions have been deduced, among others that the FIP test is suited for quality control of a given type of steel (and for comparison purposes) of different grades of the same steel. Also, significant correlation was found between times to rupture in both tests and residual longitudinal stresses.

引用

页码：164 / 174

页数：11

共 50 条

[1] Hydrogen Embrittlement of Concrete Prestressing Steel Wires: Susceptibility Tests.
Arpaia, M.
Orsini, P.G.
Pernice, P.
Metallurgia Italiana, 1988, 80 (01): : 33 - 37
[2] Hydrogen embrittlement of prestressing steels: The concept of effective stress in design
Univ of La Coruna, La Coruna, Spain
Materials and Design, 1997, 18 (02): : 81 - 85
[3] Hydrogen embrittlement of prestressing steels: the concept of effective stress in design
Toribio, J
MATERIALS & DESIGN, 1997, 18 (02): : 81 - 85
[4] EFFECT OF SURFACE RESIDUAL-STRESS ON HYDROGEN EMBRITTLEMENT OF PRESTRESSING STEELS
ELICES, M
MAEDER, G
SANCHEZGALVEZ, V
BRITISH CORROSION JOURNAL, 1983, 18 (02): : 80 - 81
[5] EFFECT OF SURFACE RESIDUAL STRESS ON HYDROGEN EMBRITTLEMENT OF PRESTRESSING STEELS.
Elices, M.
Maeder, G.
Sanchez-Galvez, V.
1600, (18):
[6] Investigations on hydrogen-induced embrittlement of quenched and tempered prestressing steels
Mietz, J
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2000, 51 (02): : 80 - 90
[7] INFLUENCE OF RESIDUAL-STRESSES ON HYDROGEN EMBRITTLEMENT SUSCEPTIBILITY OF PRESTRESSING STEELS
TORIBIO, J
ELICES, M
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1991, 28 (06) : 791 - 803
[8] Hydrogen embrittlement of prestressing cables
Perrin, M.
Gaillet, L.
Tessier, C.
Idrissi, H.
CORROSION SCIENCE, 2010, 52 (06) : 1915 - 1926
[9] Hydrogen Embrittlement of Cold Drawn Prestressing Steels: the Role of the Die Inlet Angle
Toribio, J.
Lorenzo, M.
Vergara, D.
Kharin, V.
MATERIALS SCIENCE, 2013, 49 (02) : 226 - 233
[10] Hydrogen Embrittlement of Cold Drawn Prestressing Steels: the Role of the Die Inlet Angle
J. Toribio
M. Lorenzo
D. Vergara
V. Kharin
Materials Science, 2013, 49 : 226 - 233

← 1 2 3 4 5 →