Development of a non-thermal atmospheric pressure plasma-assisted technology for the direct joining of metals with dissimilar materials

被引：8

作者：

Takenaka, Kosuke ^{[1
]}

Machida, Rikuro ^{[1
]}

Bono, Tetsuya ^{[1
]}

Jinda, Akiya ^{[1
]}

Toko, Susumu ^{[1
]}

Uchida, Giichiro ^{[2
]}

Setsuhara, Yuichi ^{[1
]}

机构：

[1] Osaka Univ, Joining & Welding Res Inst, Osaka, Ibaraki 5670047, Japan

[2] Meijo Univ, Fac Sci & Technol, 1-501 Shiogamaguchi,Tempaku Ku, Nagoya 4688501, Japan

来源：

JOURNAL OF MANUFACTURING PROCESSES | 2022年 / 75卷

关键词：

Direct joint; Atmospheric pressure plasma; Dissimilar material joining; POLYETHERETHERKETONE PEEK; POLYMERS; FAILURE; JOINTS;

D O I：

10.1016/j.jmapro.2022.01.041

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work demonstrated the joining of SUS304 stainless steel to polycarbonate (PC) using an atmospheric pressure radio frequency (RF) plasma jet in conjunction with thermal press fitting. The tensile shear stress values of samples bonded after plasma treatment of both the SUS304 and PC were found to be higher than those of specimens in which only one or neither surface was exposed to the plasma. These results confirm that an at-mospheric pressure RF plasma jet can be applied to the joining of different materials.

引用

页码：664 / 669

页数：6

共 50 条

[1] Direct bonding of stainless steel and PEEK using non-thermal atmospheric pressure plasma-assisted joining technology
Takenaka, Kosuke
Jinda, Akiya
Nakamoto, Soutaro
Toko, Susumu
Uchida, Giichiro
Setsuhara, Yuichi
JOURNAL OF MANUFACTURING PROCESSES, 2023, 105 : 276 - 281
[2] Improving bonding strength by non-thermal atmospheric pressure plasma-assisted technology for A5052/PEEK direct joining
Takenaka, Kosuke
Jinda, Akiya
Nakamoto, Soutaro
Koyari, Ryosuke
Toko, Susumu
Uchida, Giichiro
Setsuhara, Yuichi
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (1-2): : 111 - 146
[3] Improving bonding strength by non-thermal atmospheric pressure plasma-assisted technology for A5052/PEEK direct joining
Kosuke Takenaka
Akiya Jinda
Soutaro Nakamoto
Ryosuke Koyari
Susumu Toko
Giichiro Uchida
Yuichi Setsuhara
The International Journal of Advanced Manufacturing Technology, 2024, 130 : 903 - 913
[4] A NON-THERMAL PLASMA-ASSISTED METHOD
不详
CHEMISTRY & INDUSTRY, 2022, 86 (12) : 7 - 7
[5] The effect of temperature on the removal of DCM using non-thermal, atmospheric-pressure plasma-assisted catalysis
Harling, Alice M.
Wallis, Anna E.
Whitehead, J. Christopher
PLASMA PROCESSES AND POLYMERS, 2007, 4 (04) : 463 - 470
[6] ATMOSPHERIC PRESSURE NON-THERMAL PLASMA FOR THE PRODUCTION OF COMPOSITE MATERIALS
Bloise, Nora
Sampaolesi, Maurilio
Visai, Livia
Colombo, V.
Gherardi, M.
Focarete, M. L.
Gualandi, C.
Laurita, R.
Liguori, A.
Mauro, Nicolo
Manfredi, Amedea
Ferruti, Paolo
Ranucci, Elisabetta
2015 42ND IEEE INTERNATIONAL CONFERENCE ON PLASMA SCIENCES (ICOPS), 2015,
[7] Development of non-thermal atmospheric pressure plasma system for surface modification of polymeric materials
Kasih, T. P.
2ND INTERNATIONAL SYMPOSIUM ON FRONTIER OF APPLIED PHYSICS (ISFAP 2016), 2017, 817
[8] NON-THERMAL PLASMA AT ATMOSPHERIC PRESSURE: SYSTEM DESIGN AND DEVELOPMENT
Gopi, Supin
Sarma, Arun
Patel, Ashish
Ravi, G.
INSTRUMENTATION SCIENCE & TECHNOLOGY, 2013, 41 (06) : 651 - 665
[9] Simulations of planar non-thermal plasma assisted ignition at atmospheric pressure
Casey, Tiernan A.
Han, Jie
Belhi, Memdouh
Arias, Paul G.
Bisetti, Fabrizio
Im, Hong G.
Chen, Jyh-Yuan
PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2017, 36 (03) : 4155 - 4163
[10] Non-thermal plasma-assisted ammonia production: A review
Zhang, Jun
Li, Xiaotian
Zheng, Jili
Du, Miao
Wu, Xuehong
Song, Jun
Cheng, Chuanxiao
Li, Tao
Yang, Wei
ENERGY CONVERSION AND MANAGEMENT, 2023, 293

← 1 2 3 4 5 →