A quantitative metallographic study of fibre fracture during processing and creep of a short fibre reinforced aluminium alloy

被引：0
|
作者：
Kausträter, G [1 ]
Skrotzki, B [1 ]
Eggeler, G [1 ]
机构：
[1] Ruhr Univ Bochum, Inst Werkstoffe, Lehrstuhl Werkstoffwissensch, D-44780 Bochum, Germany
来源：
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY | 2000年 / 37卷 / 11期
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In order to investigate the kinetics of fibre fracture occurring during creep in short fibre reinforced aluminium alloys produced by squeeze casting, a precise measurement of fibre lengths is necessary. A method is described which permits such fibres to be measured far more accurately than was previously possible. Using this method of measurement it is confirmed that fibre fracture occurs during creep. It is also shown that higher volume fractions of fibres in the composite material are always associated with smaller fibre lengths, this being due to fibres fracturing during the fibre preform manufacturing process. It is further shown that fibres also break during the infiltration process.
引用
收藏
页码：619 / 630
页数：12
相关论文
共 50 条
  • [1] On the influence of fibre texture on the compression creep behaviour of a short fibre reinforced aluminium alloy
    Yawny, A
    Kausträter, G
    Skrotzki, B
    Eggeler, G
    [J]. SCRIPTA MATERIALIA, 2002, 46 (12) : 837 - 842
  • [2] Thermal cycling creep of a short fibre reinforced aluminium piston alloy
    Schnabl, A
    Degischer, HP
    [J]. ZEITSCHRIFT FUR METALLKUNDE, 2003, 94 (06): : 743 - 748
  • [3] Creep anisotropy of aluminium alloy-base short fibre reinforced MMC
    Kucharová, K
    Horkel, T
    Dlouhy, A
    [J]. CREEP BEHAVIOR OF ADVANCED MATERIALS FOR THE 21ST CENTURY, 1999, : 127 - 136
  • [4] On the influence of fibre texture on shear creep behaviour of short fibre reinforced aluminium alloys
    Kausträter, G
    Yawny, A
    Schürhoff, J
    Skrotzki, B
    Eggeler, G
    Stöckhert, B
    [J]. CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, 2001, : 207 - 217
  • [5] Microstructural assessment of fibre damage after tensile and shear creep deformation of a short fibre reinforced aluminium alloy with a fibre volume fraction of 8%
    Yawny, A
    Kausträter, G
    Valek, R
    Schürhoff, J
    Skrotzki, B
    Eggeler, G
    Stöckhert, B
    [J]. CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, 2001, : 219 - 228
  • [6] Back flow creep phenomena in short fibre reinforced aluminium alloys
    Kausträter, G
    Yawny, A
    Wagner, M
    Skrotzki, B
    Eggeler, G
    [J]. ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 1303 - 1308
  • [7] Low cycle fatigue and creep-fatigue interaction in short fibre reinforced aluminium alloy composite
    Prasad, N. Eswara
    Vogt, D.
    Bidlingmaier, T.
    Wanner, A.
    Arzt, E.
    [J]. MATERIALS SCIENCE AND TECHNOLOGY, 2010, 26 (11) : 1363 - 1372
  • [8] Fibre breakage during creep of short fibre reinforced Al-7Si-3Cu-lMg alloy
    Válek, R
    Kucharová, K
    Dlouhy, A
    [J]. CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, 2001, : 281 - 290
  • [9] Short aluminosilicate fibre reinforced aluminium
    Kavecky, S
    Sebo, P
    [J]. JOURNAL OF MATERIALS SCIENCE, 1996, 31 (03) : 757 - 764
  • [10] Fabrication of gradient distribution alumina short fibre reinforced aluminium alloy
    Ma, AB
    Imura, T
    Kuzuya, K
    Nishida, Y
    [J]. JOURNAL OF MATERIALS SCIENCE, 1999, 34 (15) : 3813 - 3819
12345