Preparation and application of teicoplanin functionalized polymeric monolith for enantioseparation of chiral drugs

A novel chiral stationary phase (CSP), based on a monolithic organic polymer chemically modified with teicoplanin, was fabricated within a 100 mu m I.D. fused silica capillary. The teicoplanin was firstly derivatized with 2-isocyanatoethyl methacrylate (ICNEML) and then thermally co-polymerized with the crosslinker ethylene dimethacrylate (EDMA) in presence of porogens (methanol and dimethylsulfoxide). The optimal experimental conditions (e.g., concentration and ratio of the reagents), considering enantioresolution and permeability, were systematically investigated. The prepared monolith was evaluated using scanning electron microscopy, and the column exhibited quite good morphology. In order to further evaluate the enantioresolving power of the poly(ICNEML-teicoplanin-co-EDMA) monolith, a series of basic and acidic chiral compounds were analyzed using an isocratic mode of polar organic solvents (methanol and acetonitrile) or the same solvents in combination with water (reversed-phase) by nano-liquid chromatography. Five mandelic acids and six derivatized amino acids were enantiore-solved under reversed-phase mode (R-s = 1.22-3.47 and alpha = 1.43-6.33). This monolithic teicoplanin-CSP was also effective in the enantioseparations of 17 amino alcohol drugs employing polar-organic phase mode (MeOH/ACN/TEA/HOAc (80/20/0.03/0.055, v/v/v/v)). Ten of them were baseline enantiore-solved (alprenolol, betaxolol, clenbuterol, isoproterenol, metoprolol, pindolol, propranolol, salbutamol, sotalol, tertatolol) (R-s =1.55-2.48 and alpha = 1.21-1.55), while the others were partially enantioseparated (R-s= 1.14-1.48). (C) 2020 Elsevier B.V. All rights reserved.