Study of mass transfer and determination of drop size distribution in a pulsed extraction column

A better understanding of pulsed liquid-liquid extraction columns was obtained by using an online digital image analysis system to characterize emulsion drop. The mass transfer of acetic acid from dispersed phase (ethyl acetate) to continuous phase (water) was studied under standard conditions. The system enabled drop size distribution (DSD) to be measured as a function of physical and thermodynamic parameters. The surface tension was investigated by static contact angle measurement. Mass transfer and energy transfer, characterized by the surface/volume ratio of the droplets were compared with the working parameters in order to interpret restrictive phenomena such as hold up and column efficiency. The experimental values of Sauter diameter (d(32)) and those predicted by a correlation proposed in the literature are in good agreement. However, the adhesion work between liquid and PTFE plate surface indicates that interface property variations, as a function of solute concentration, must be taken into account in the theoretical correlations. It was found that hold up and separation efficiency depend mainly on the stirring rate. These results show that online image analysis can be used as a process control of a liquid-liquid extraction column in order to optimize the mixing phenomena and the DSD, the key parameter of extraction efficiency. (C) 2010 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.