Heat transfer through metal foam-fluid system

被引:18
|
作者
Dyga, Roman [1 ]
Placzek, Malgorzata [1 ]
机构
[1] Opole Univ Technol, Dept Chem & Proc Engn, PL-45271 Opole, Poland
关键词
Effective thermal conductivity; Open-cell metal foam; Conduction heat transfer; Convective heat transfer; Foam-fluid system; EFFECTIVE THERMAL-CONDUCTIVITY; ALUMINUM FOAM; ELECTRICAL-CONDUCTIVITY;
D O I
10.1016/j.expthermflusci.2015.02.021
中图分类号
O414.1 [热力学];
学科分类号
摘要
The paper reports the current state of the art and results obtained from research into heat transfer through metal foams filled with fluid. The impact of the fluid on the value of so-called effective thermal conductivity of foam and the heat transfer mechanism in a foam-fluid system is described. The experimental research was conducted using three aluminum foams with cells that were filled with air, water and oil. A substantial impact of fluid on the effective thermal conductivity value of metal foams was found. This impact is particularly remarkable in the case of fluid circulations in cellular structure of the foam. A correlation that describes effective thermal conductivity of foam-fluid system was developed. The proposed model also finds its application for convective heat transfer in the intercellular area of foams. (C) 2015 Elsevier Inc. All rights reserved.
引用
收藏
页码:1 / 12
页数:12
相关论文
共 50 条
  • [1] COMBINATION FOAM-FLUID FRACTURING
    BULLEN, RS
    [J]. JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY, 1980, 19 (03): : 51 - 56
  • [2] Analysis on flow and heat transfer of fluid in porous metal foam heat exchanger
    Li, Ju-Xiang
    Tu, Shan-Dong
    [J]. Shiyou Huagong Gaodeng Xuexiao Xuebao/Journal of Petrochemical Universities, 2008, 21 (02): : 80 - 83
  • [3] Numerical Simulations of Fluid Flow and Heat Transfer through Aluminum and Copper Metal Foam Heat Exchanger - A Comparative Study
    Kotresha, Banjara
    Gnanasekaran, Nagarajan
    [J]. HEAT TRANSFER ENGINEERING, 2020, 41 (6-7) : 637 - 649
  • [4] Simulation on heat and mass transfer of fluid flow boiling in metal foam
    Zhu, Yu
    Hu, Haitao
    Ding, Guoliang
    [J]. Huagong Xuebao/CIESC Journal, 2010, 61 (SUPPL. 2): : 30 - 34
  • [5] Heat transfer and fluid flow in metal foam subjected to oscillating flow
    Leong, K. C.
    Jin, L. W.
    [J]. HT2005: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE 2005, VOL 1, 2005, : 301 - 310
  • [6] HEAT TRANSFER THROUGH METAL-FOAM HEAT EXCHANGER AT HIGHER TEMPERATURE
    Hafeez, P.
    Esmaeelpanah, J.
    Chandra, S.
    Mostaghimi, J.
    [J]. PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE - 2013, VOL 2, 2014,
  • [7] COMBINATION FOAM-FLUID FRACTURING - NEW STIMULATION TECHNIQUE
    BULLEN, R
    [J]. JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY, 1978, 17 (01): : 33 - 33
  • [8] Analysis of heat transfer in oscillating flow through a channel filled with metal foam using computational fluid dynamics
    Ghafarian, Mohsen
    Mohebbi-Kalhori, Davod
    Sadegi, Jafar
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2013, 66 : 42 - 50
  • [9] Simplified heat transfer analysis in metal foam with low-conductivity fluid
    Dukhan, Nihad
    Picon-Feliciano, Ruben
    [J]. Proceedings of the ASME Heat Transfer Division 2005, Vol 2, 2005, 376-2 : 417 - 424
  • [10] CFD SIMULATIONS OF FLOW AND HEAT TRANSFER THROUGH THE POROUS INTERFACE OF A METAL FOAM HEAT EXCHANGER
    Sauret, Emilie
    Hooman, Kamel
    Saha, Suvash C.
    [J]. PROCEEDINGS OF THE ASME POWER CONFERENCE, 2014, VOL 1, 2014,